Pressureless sintering of ZrB2-SiC ceramics: the effect of B4C content

被引：70
|
作者：
Zhang, Hui [1 ,2 ]
Yan, Yongjie [1 ]
Huang, Zhengren [2 ]
Liu, Xuejian [1 ]
Jiang, Dongliang [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
[2] Chinese Acad Sci, Grad Sch, Beijing 100039, Peoples R China
来源：
SCRIPTA MATERIALIA | 2009年 / 60卷 / 07期
基金：
中国国家自然科学基金;
关键词：
ZrB2; SiC; Microstructure; Mechanical properties; HIGH TEMPERATURE CERAMICS; DIBORIDE-BASED COMPOSITES; ZIRCONIUM DIBORIDE; MECHANICAL-PROPERTIES; BORON-CARBIDE; MICROSTRUCTURE; OXIDATION; BEHAVIOR; ADDITIONS; SPS;
D O I：
10.1016/j.scriptamat.2008.12.003
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Systematic studies were carried out on the sintering of ZrB2 SiC ceramics without any external pressure being applied. The densities, mechanical properties and microstructures with different contents of B4C were investigated. The results showed that B4C additions were beneficial not only for the sintering process but also for the oxidation resistance. The sintered ZrB2-SiC ceramics with 0.4 wt.% B4C addition had an average strength of 382 +/- 24 MPa and a modulus of 405 +/- 34 GPa. The hardness and toughness were 13.4 +/- 0.4 GPa and 3.7 +/- 10.2 MPa m(1/2), respectively. The effect of B4C addition on the oxidation resistance of ZrB2-SiC was studied by observing the mass changes and the residual strengths of samples after oxidized treatments. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：559 / 562
页数：4
相关论文
共 50 条
  • [41] Preparation and properties of ZrB2-SiC porous ceramics by spark plasma sintering
    Qi, Yushi
    Chen, Gang
    Cheng, Yehong
    Han, Wenbo
    Du, Zhiming
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2019, 127 (07) : 469 - 473
  • [42] Effect of TiO2 and TiB2 on Pressureless Sintering of B4C
    da Rocha, Rosa Maria
    Lourenco de Melo, Francisco C.
    ADVANCED POWDER TECHNOLOGY VIII, PTS 1 AND 2, 2012, 727-728 : 1022 - 1027
  • [43] Transmission Electron Microscopy Investigation of Hot-pressed ZrB2-SiC with B4C Additive
    Kim, Seongwon
    Chae, Jung-Min
    Lee, Sung-Min
    Oh, Yoon-Suk
    Kim, Hyung-Tae
    Jang, Byung-Koog
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2015, 52 (06) : 462 - 466
  • [44] Effect of carbon nanotubes on the properties of ZrB2-SiC ceramics
    Tian, Wu-Bian
    Kan, Yan-Mei
    Zhang, Guo-Jun
    Wang, Pei-Ling
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 487 (1-2): : 568 - 573
  • [45] Pressureless Sintering of ZrB2-SiC Ceramics Incorporating Sol-gel Synthesized Ultra-fine Ceramic Powders
    Zhang, Hui
    Yan, Yongjie
    Huang, Zhengren
    Liu, Xuejian
    Jiang, Dongliang
    HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 : 193 - 196
  • [46] Preparation of YAG gel coated ZrB2-SiC composite prepared by gelcasting and pressureless sintering
    He, Rujie
    Zhang, Xinghong
    Hu, Ping
    Han, Wenbo
    Hong, Changqing
    COMPOSITES PART B-ENGINEERING, 2013, 54 : 307 - 312
  • [47] Effects of HfB2 addition on pressureless sintering behavior and microstructure of ZrB2-SiC composites
    Jafari, Shahabeddin
    Bavand-Vandchali, Mohammad
    Mashhadi, Mehri
    Nemati, Ali
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 94
  • [48] Oxidation Behaviors of the Pressureless Sintered ZrB2-SiC Composites
    Yan Yong-Jie
    Zhang Hui
    Huang Zheng-Ren
    Liu Xue-Jan
    JOURNAL OF INORGANIC MATERIALS, 2009, 24 (03) : 631 - 635
  • [49] Pressureless densification of ZrB2-Sic composites with vanadium carbide
    Zou, Ji
    Zhang, Guo-Jun
    Kan, Yan-Mei
    Wang, Pei-Ling
    SCRIPTA MATERIALIA, 2008, 59 (03) : 309 - 312
  • [50] The effect of the sintering atmosphere on the densification of B4C ceramics
    Frage, N
    Levin, L
    Dariel, MP
    JOURNAL OF SOLID STATE CHEMISTRY, 2004, 177 (02) : 410 - 414
12345