Fabrication of fluorine-doped diamond-like carbon stamps for UV nanoimprint lithography

被引：9
|
作者：
Altun, A. O.
Jeong, J. H.
Rha, J. J.
Choi, D. G.
Kim, K. D.
Lee, E. S.
机构：
[1] Korea Inst Machinery & Mat, Nanomech Syst Res Ctr, Taejon 305343, South Korea
[2] Korea Inst Machinery & Mat, Surface Technol Res Ctr, Chang Won, Kyungnam Do, South Korea
来源：
NANOTECHNOLOGY | 2006年 / 17卷 / 18期
关键词：
9;
D O I：
10.1088/0957-4484/17/18/022
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Two fluorine-doped diamond-like carbon (F-DLC) stamps with sub-100 nm line patterns were fabricated using a direct etching method. These were applied successfully to ultraviolet (UV) nanoimprint lithography without requiring an anti-adhesion layer coating. Tests were performed to determine the optimum fluorine concentration for the F-DLC stamps. The ideal stamp material consisted of 25 at.% F-DLC with a contact angle of 85 degrees, UV transmittance of 16.4-26.8%, and hardness of 4.5 GPa. The O-2 plasma etch rate of the DLC was increased considerably by the fluorine doping, making it comparable to the etch rate of polymethyl methacrylate (PMMA). Thus, only PMMA was used as the etch mask in the fabrication of the stamps.
引用
收藏
页码：4659 / 4663
页数：5
相关论文
共 50 条
  • [21] Nanoimprint lithography using vertically aligned carbon nanostructures as stamps
    Saleem, A. M.
    Berg, J.
    Desmaris, V.
    Kabir, M. S.
    NANOTECHNOLOGY, 2009, 20 (37)
  • [22] Enhancement of a heat transfer performance on the Al6061 surface using microstructures and fluorine-doped diamond-like carbon (F-DLC) coating
    Ryu, Hojun
    Kim, Jisoo
    Kim, Jongkuk
    Kim, Do Hyun
    Kang, Yong-Jin
    Jang, Young-Jun
    Jeong, Ji Hwan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 148
  • [23] Structural, mechanical and hydrophobic properties of fluorine-doped diamond-like carbon films synthesized by plasma immersion ion implantation and deposition (PIII-D)
    Yao, ZQ
    Yang, P
    Huang, N
    Sun, H
    Wang, J
    APPLIED SURFACE SCIENCE, 2004, 230 (1-4) : 172 - 178
  • [24] Fabrication and properties of tappet with diamond-like carbon film
    Li, J. (qy@faw.com.cn), 1600, Editorial Board of Jilin University (43):
  • [25] Fabrication of diamond-like amorphous carbon cantilever resonators
    Chua, DHC
    Milne, WI
    Sheeja, D
    Tay, BK
    Schneider, D
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2004, 22 (06): : 2680 - 2684
  • [26] Ion beam synthesis of the diamond like carbon films for nanoimprint lithography applications
    Meskinis, S.
    Kopustinskas, V.
    Slapikas, K.
    Tamulevicius, S.
    Guobiene, A.
    Gudaitis, R.
    Grigaliunas, V.
    THIN SOLID FILMS, 2006, 515 (02) : 636 - 639
  • [27] Fabrication of plasmonic waveguides by nanoimprint and UV-lithography
    Nielsen, Rasmus B.
    Boltasseva, Alexandra
    Kristensen, Anders
    Bozhevolnyi, Sergey I.
    Volkov, Valentyn S.
    Cuesta, Irene Fernandez
    Klukowska, Anna
    ADVANCED FABRICATION TECHNOLOGIES FOR MICRO/NANO OPTICS AND PHOTONICS, 2008, 6883
  • [28] Fabrication of metallic nanocavities by soft UV nanoimprint lithography
    Shi, J.
    Chen, J.
    Decanini, D.
    Chen, Y.
    Haghiri-Gosnet, A. -M.
    MICROELECTRONIC ENGINEERING, 2009, 86 (4-6) : 596 - 599
  • [29] Studies of phosphorus doped diamond-like carbon films
    Kuo, MT
    May, PW
    Gunn, A
    Ashfold, MNR
    Wild, RK
    DIAMOND AND RELATED MATERIALS, 2000, 9 (3-6) : 1222 - 1227
  • [30] Electrical properties of fluorine doped Diamond Like Carbon
    Trippe, S. C.
    Madaleno, J. C.
    Pereira, L.
    ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 : 53 - 57
12345