Temperature effect on tribological properties of polyol ester-based environmentally adapted lubricant

被引：43

作者：

Aziz, Nur Atiqah Mohamad ^{[1
]}

Yunus, Robiah ^{[1
,2
]}

Rashid, Umer ^{[1
]}

Zulkifli, Nurin Wahidah Mohamad ^{[3
]}

机构：

[1] Univ Putra Malaysia, Inst Adv Technol, Upm Serdang 43400, Selangor, Malaysia

[2] Univ Putra Malaysia, Fac Engn, Dept Chem & Environm Engn, Upm Serdang 43400, Selangor, Malaysia

[3] Univ Malaya, Dept Mech Engn, Kuala Lumpur 50603, Malaysia

来源：

TRIBOLOGY INTERNATIONAL | 2016年 / 93卷

关键词：

Polyol ester; Tribology properties; Pentaerythritol ester; Lubricant regime; PALM OIL; ADDITIVES; FLUIDS; FRICTION; BEHAVIOR;

D O I：

10.1016/j.triboint.2015.09.014

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The production of pentaerythritol ester (PE) as food grade lubricant base oil was investigated. The properties of formulated lubricant (AWCI) and neopentyl glycol ester (NPGE) were tested - density, viscosity, total acid number, flash point, copper strip corrosion and NOACK. Wear scar diameter (WSD) and coefficient of friction (COF) were analyzed and compared to commercial lubricant (CL). AWCI which comprised of 0.15% Irgalube 349, 0.15% Irgalube TPPT, and 0.1% Irgamet 39 showed excellent lubricant properties with high flash point, low WSD and low COF at all temperatures despite its lower viscosity than the commercial lubricant, CL. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：43 / 49

页数：7

共 50 条

[41] RSM and Crow Search Algorithm-Based Optimization of Ultrasonicated Transesterification Process Parameters on Synthesis of Polyol Ester-Based Biolubricant
Arumugam, S.
Chengareddy, P.
Tamilarasan, A.
Santhanam, V.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2019, 44 (06) : 5535 - 5548
[42] Synthesis of a Novel Ester-Based Drilling Fluid Applicable to High Temperature Conditions
Nasiri, M.
Ashrafizadeh, S. N.
Ghalambor, A.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2009, 131 (01): : 0131031 - 01310310
[43] Improving the mechanical, thermal and electrical properties of polyurethane- graphene oxide nanocomposites synthesized by in-situ polymerization of ester-based polyol with hexamethylene diisocyanate
Ramin Shamsi
Mojtaba Koosha
Mojtaba Mahyari
Journal of Polymer Research, 2016, 23
[44] Improving the mechanical, thermal and electrical properties of polyurethane-graphene oxide nanocomposites synthesized by in-situ polymerization of ester-based polyol with hexamethylene diisocyanate
Shamsi, Ramin
Koosha, Mojtaba
Mahyari, Mojtaba
JOURNAL OF POLYMER RESEARCH, 2016, 23 (12)
[45] Effect of lubricant ageing on lubricants' physical and chemical properties and tribological performance; Part I: effect of lubricant chemistry
Cen, Hui
Morina, Ardian
Neville, Anne
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2018, 70 (02) : 385 - 392
[46] Effect of ester based lubricant SMJH-1 on the lubricity properties of water based drilling fluid
Dong, Xiaoqiang
Wang, Lin
Yang, Xiaohua
Lin, Yongxue
Xue, Yuzhi
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2015, 135 : 161 - 167
[47] Pentaerythritol rosin ester as an environmentally friendly multifunctional additive in vegetable oil-based lubricant
Xu, Zhuang
Lou, Wenjing
Zhao, Gaiqing
Zhang, Ming
Hao, Junying
Wang, Xiaobo
TRIBOLOGY INTERNATIONAL, 2019, 135 : 213 - 218
[48] Effect of multi-walled carbon nanotubes on tribological properties of lubricant
Chen, CS
Chen, XH
Hu, JM
Zhang, H
Li, WH
Xu, LS
Yang, Z
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (02) : 300 - 305
[49] Tribological Properties of Friction Pairs in Lubricant Contaminated with Particles under High Temperature
Hu, Ningning
Wu, Na
Wang, Songquan
Jiang, Haibo
Li, Zhipeng
TRIBOLOGY TRANSACTIONS, 2017, 60 (04) : 663 - 669
[50] Effect of multi-walled carbon nanotubes on tribological properties of lubricant
陈传盛
陈小华
胡静
张华
李文华
许龙山
杨植
TransactionsofNonferrousMetalsSocietyofChina, 2005, (02) : 300 - 305

← 1 2 3 4 5 →