A Compact High-Accuracy Rail-to-Rail CMOS Operational Amplifier

被引：0
|
作者：
Wang, X. Y. [1 ]
Yu, L. [1 ]
Wang, L. [1 ]
机构：
[1] Chinese Acad Sci, Shenzhen Inst Adv Technol, Inst Biomed Engn & Hlth Technol, Shenzhen, Peoples R China
来源：
2010 4TH INTERNATIONAL CONFERENCE ON BIOINFORMATICS AND BIOMEDICAL ENGINEERING (ICBBE 2010) | 2010年
关键词：
Op-Amp; rail-to-rail; robustmess; INPUT-STAGE; OP-AMP; VOLTAGE; DESIGN; OPAMP;
D O I：
暂无
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
compact high-accuracy rail-to-rail CMOS operational amplifier (Op-Amp) is presented using strong inversion techniques to achieve power consumption of 90 mu W under 1.8V supply voltage. Two complementary differential pair techniques and one-versus-three current mirror compensation techniques are adopted to realize wide input dynamic range, while the output stage provides rail-to-rail output drive through the use of resistor-compensation circuits (RCC) and self-regular circuits (SRC). Simulation results demonstrated that the active area is only 0.001mm2 and the transconductance variation can be restricted to +/- 5% hence the accurate of common-mode rang (99.9%) was improved as well as the total harmonic distortion.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] The Design Rail-to-Rail Operational Amplifier Used in PGA
    Zha, Xiaofang
    Yin, Yongsheng
    2015 IEEE 9TH INTERNATIONAL CONFERENCE ON ANTI-COUNTERFEITING, SECURITY, AND IDENTIFICATION (ASID), 2015, : 61 - 65
  • [22] Implementation of Rail-to-Rail Operational Amplifier for Biomedical Applications
    Lee, Min-Chin
    Yang, Zth-Ru
    Hu, Zth-Jing
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 434 - 437
  • [23] Design and implementation of CMOS rail-to-rail operational amplifiers
    Lorenzo, Michael Angelo G.
    Manzano, Arnold Abram S.
    Gusad, Maria Theresa A.
    Hizon, John Richard E.
    Rosales, Marc D.
    2007 INTERNATIONAL SYMPOSIUM ON COMMUNICATIONS AND INFORMATION TECHNOLOGIES, VOLS 1-3, 2007, : 61 - 66
  • [24] Input/output rail-to-rail CMOS operational amplifier with shaped common-mode response
    Duque-Carrillo, JF
    Carrillo, JM
    Ausín, JL
    Torelli, G
    ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 2003, 34 (03) : 221 - 232
  • [25] Input/Output Rail-to-Rail CMOS Operational Amplifier with Shaped Common-Mode Response
    J. F. Duque-Carrillo
    J. M. Carrillo
    J. L. Ausín
    G. Torelli
    Analog Integrated Circuits and Signal Processing, 2003, 34 : 221 - 232
  • [26] Constant-Gm, Rail-to-Rail Input Stage Operational Amplifier in 0.35μm CMOS
    Hassanzadeh, Ali
    Ahmadzadeh-Khosroshahi, Nader
    Kouzekanani, Z. D.
    Sobhi, J.
    Andalib, Ali Reza
    NETWORK AND ELECTRONICS ENGINEERING, 2011, 11 : 37 - 43
  • [27] Integrated bipolar operational amplifier with rail-to-rail inputs and output
    Coelho-Sousae, JV
    40TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1 AND 2, 1998, : 1419 - 1422
  • [28] A very compact CMOS instrumentation amplifier with nearly rail-to-rail input common mode range
    Bruschi, P.
    Del Cesta, F.
    Longhitano, A. N.
    Piotto, M.
    Simmarano, R.
    PROCEEDINGS OF THE 40TH EUROPEAN SOLID-STATE CIRCUIT CONFERENCE (ESSCIRC 2014), 2014, : 323 - +
  • [29] Design of Novel Chopper Stabilized Rail-to-Rail Operational Amplifier
    Xu Yong
    Zhao Fei
    Sun Zheng
    Wu Yuanliang
    PROCEEDINGS OF 2015 IEEE 11TH INTERNATIONAL CONFERENCE ON ASIC (ASICON), 2015,
  • [30] A Versatile Chopper-Stabilized Rail-to-Rail Operational Amplifier
    Ge, Fuding
    Jalali-Farahani, Bahar
    2008 51ST MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1 AND 2, 2008, : 113 - 116
12345