Effects of the Duty Ratio on the Niobium Oxide Film Deposited by Pulsed-DC Magnetron Sputtering Methods

被引：2
|
作者：
Eom, Ji Mi [1 ]
Oh, Hyun Gon [2 ]
Cho, Il Hwan [2 ]
Kwon, Sang Jik [1 ]
Cho, Eou Sik [1 ]
机构：
[1] Gachon Univ, Dept Elect Engn, Songnam 461701, South Korea
[2] Myongji Univ, Dept Elect Engn, Yongin 449728, South Korea
来源：
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2013年 / 13卷 / 11期
关键词：
Niobium Oxide (Nb2O5); Pulsed-DC Sputtering; Duty Ratio; Reverse Voltage Time; Schottky Barrier; THIN-FILMS;
D O I：
10.1166/jnn.2013.7816
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Niobium oxide (Nb2O5) films were deposited on p-type Si wafers and sodalime glasses at a room temperature using in-line pulsed-DC magnetron sputtering system with various duty ratios. The different duty ratio was obtained by varying the reverse voltage time of pulsed DC power from 0.5 to 2.0 mu s at the fixed frequency of 200 kHz. From the structural and optical characteristics of the sputtered NbOx films, it was possible to obtain more uniform and coherent NbOx films in case of the higher reverse voltage time as a result of the cleaning effect on the Nb2O5 target surface. The electrical characteristics from the metal-insulator-semiconductor (MIS) fabricated with the NbOx films shows the leakage currents are influenced by the reverse voltage time and the Schottky barrier diode characteristics.
引用
收藏
页码：7760 / 7765
页数：6
相关论文
共 50 条
  • [31] Influence of Ag Doping on the Microstructural, Optical, and Electrical Properties of ZrSiN Coatings Deposited through Pulsed-DC Reactive Magnetron Sputtering
    Parra, Henry Samir Vanegas
    Velasco, Sebastian Calderon
    Orjuela, Jose Edgar Alfonso
    Florez, Jhon Jairo Olaya
    Carvalho, Sandra
    COATINGS, 2023, 13 (07)
  • [32] Structure and properties of Ti films deposited by dc magnetron sputtering, pulsed dc magnetron sputtering and cathodic arc evaporation
    Yang, Chao
    Jiang, Bailing
    Liu, Zheng
    Hao, Juan
    Feng, Lin
    SURFACE & COATINGS TECHNOLOGY, 2016, 304 : 51 - 56
  • [33] Effect of sputtering pressure on pulsed-DC sputtered iridium oxide films
    Negi, S.
    Bhandari, R.
    Rieth, L.
    Solzbacher, F.
    SENSORS AND ACTUATORS B-CHEMICAL, 2009, 137 (01): : 370 - 378
  • [34] Characteristics of the Deposition Rate per Unit Power on Pulsed-DC Magnetron Sputtering Source
    An, Sanghyuk
    In, Junghwan
    Chang, Hongyoung
    PLASMA PROCESSES AND POLYMERS, 2009, 6 (12) : 855 - 859
  • [35] Effect of Cr Atom Plasma Emission Intensity on the Characteristics of Cr-DLC Films Deposited by Pulsed-DC Magnetron Sputtering
    Li, Guang
    Xu, Yi
    Xia, Yuan
    COATINGS, 2020, 10 (07)
  • [36] Evaluation of adhesion and fatigue of MoS2-Nb solid-lubricant films deposited by pulsed-dc magnetron sputtering
    Arslan, Ersin
    Baran, Ozlem
    Efeoglu, Ihsan
    Totik, Yasar
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (11): : 2344 - 2348
  • [37] Potential for reactive pulsed-dc magnetron sputtering of nanocomposite VOx microbolometer thin films
    Jin, Yao O.
    Ozcelik, Adem
    Horn, Mark W.
    Jackson, Thomas N.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2014, 32 (06):
  • [38] Adhesion and fatigue resistance of Ta-doped MoS2 composite coatings deposited with pulsed-DC magnetron sputtering
    Baran, Ozlem
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2017, 31 (11) : 1181 - 1195
  • [39] PZT thin film preparation by pulsed DC magnetron sputtering
    Lin, Y. C.
    Chuang, H. A.
    Shen, J. H.
    VACUUM, 2009, 83 (06) : 921 - 926
  • [40] Effects of Pulse Bias on Structure and Properties of MoN Film Deposited by DC Magnetron Sputtering
    Xu Xing
    Su Fenghua
    Li Zhujun
    CHINA SURFACE ENGINEERING, 2019, 32 (02) : 54 - 62
12345