Experimental study on the interaction between particulate fouling and precipitation fouling in the fouling process on heat transfer tubes

被引:38
|
作者
Shen, Chao [1 ]
Wang, Yuan [1 ]
Tang, Zhenbo [1 ]
Yao, Yang [1 ]
Huang, Yudong [2 ]
Wang, Xinlei [3 ]
机构
[1] Harbin Inst Technol, Sch Architecture, Minist Ind & Informat Technol, Key Lab Cold Reg Urban & Rural Human Settlement E, Harbin 150090, Heilongjiang, Peoples R China
[2] Harbin Inst Technol, Sch Chem & Chem Engn, Harbin 150001, Heilongjiang, Peoples R China
[3] Univ Illinois, Dept Agr & Biol Engn, Urbana, IL 61081 USA
基金
中国国家自然科学基金;
关键词
Interaction; Particulate fouling; Precipitation fouling; Combined fouling; Heat transfer tube; FERRIC-OXIDE PARTICLES; WATER; ROUGHNESS;
D O I
10.1016/j.ijheatmasstransfer.2019.04.136
中图分类号
O414.1 [热力学];
学科分类号
摘要
This study investigated the interaction between particulate fouling and precipitation fouling on two different enhanced tubes and a plain tube in a shell-and-tube condenser. Three kinds of fouling, including particulate fouling, precipitation fouling, and combined fouling, were measured continuously for more than 720 h in three individual tests, respectively. For the particulate fouling, three tubes suffered a similar fouling process. The asymptotic fouling resistance of the precipitation fouling on enhanced tubes was lower than on the plain tube. However, for the combined fouling, the enhanced tube with a larger start number experienced the greatest fouling. On the same tube, the asymptotic fouling resistances ranked from least to greatest in the following order: particulate fouling, precipitation fouling, combined fouling; and the durations of the induction period ranked as: particulate fouling, precipitation fouling, combined fouling. As for the combined fouling existent in real cooling water systems, the fouling induction period on the plain tube was longer than that of enhanced tubes. Compared with the particulate fouling (SiO2) and precipitation fouling (CaCO3), which had a high bond strength on the tube surface, the combined fouling was soft and easily removed by flow erosion or collision with big particles during the induction period. This indicated that particles mixed in the water could extend the induction period of combined fouling. However, once the combined fouling started to grow, these particles sticking on the heat transfer surface provided nucleation sites for the crystallization process and, thus, increased the fouling thermal resistance significantly. In addition, the results indicated that the variation profile of the accelerated combined fouling after scaling down is similar to the fouling process in a real system. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1238 / 1250
页数:13
相关论文
共 50 条
  • [1] Interaction between particulate fouling and precipitation fouling: Sticking probability and deposit bond strength
    Wang, Yuan
    Shen, Chao
    Tang, Zhenbo
    Yao, Yang
    Wang, Xinlei
    Park, Benjamin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 144
  • [2] Experimental study on the effect of fouling in tubes on pool boiling heat transfer characteristics
    Liu, Lian-Sheng
    Li, Ji-Feng
    Lian, Tian-Cheng
    Liu, Xuan-Chen
    Liu, Hui-Long
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2025, 163
  • [3] Fouling in enhanced tubes using cooling tower water Part II: combined particulate and precipitation fouling
    Li, W
    Webb, RL
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2000, 43 (19) : 3579 - 3588
  • [4] An experimental study on fouling around tubes
    Ha, MY
    Lee, DR
    Ahn, SP
    Park, HD
    HEAT TRANSFER - BALTIMORE 1997, 1997, (214): : 327 - 332
  • [5] Particulate fouling in heat exchangers
    Mueller-Steinhagen, Hans
    Bloechl, Rainer
    Transactions of the Institution of Professional Engineers New Zealand. Electrical, Mechanical, and Chemical Engineering Section, 1988, 15 (03): : 109 - 118
  • [6] FOULING OF HEAT EXCHANGER TUBES
    MORGAN, AI
    CARLSON, RA
    FOOD TECHNOLOGY, 1960, 14 (06) : B33 - B33
  • [7] Particulate fouling and composite fouling assessment in corrugated plate heat exchangers
    Zhang, Guan-min
    Li, Guan-qiu
    Li, Wei
    Zhang, Zhaoyan
    Leng, Xue-li
    Tian, Mao-cheng
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 60 : 263 - 273
  • [8] Precipitation and Particular Fouling on Heat Transfer Surfaces.
    Krause, Siegfried
    VDI Forschungsheft, 1986,
  • [9] Numerical simulation and experimental study of the growth characteristics of particulate fouling on pipe heat transfer surface
    Zhang, Ning
    Wei, Xin
    Yang, Qirong
    Li, Nan
    Yao, Erren
    HEAT AND MASS TRANSFER, 2019, 55 (03) : 687 - 698
  • [10] Numerical simulation and experimental study of the growth characteristics of particulate fouling on pipe heat transfer surface
    Ning Zhang
    Xin Wei
    Qirong Yang
    Nan Li
    Erren Yao
    Heat and Mass Transfer, 2019, 55 : 687 - 698