Finite element modeling of grain growth by point tracking method in friction stir welding of AA6082-T6

被引：27
|
作者：
Wan, Z. Y. [1 ]
Zhang, Z. [1 ]
Zhou, X. [1 ]
机构：
[1] Dalian Univ Technol, Fac Vehicle Engn & Mech, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2017年 / 90卷 / 9-12期
基金：
中国国家自然科学基金;
关键词：
Friction stir welding; Coupled thermo-mechanical model; Material flow; Grain size; MECHANICAL-PROPERTIES; MATERIAL BEHAVIORS; TOOL; TEMPERATURE; SIMULATION; PARAMETERS; FLOW;
D O I：
10.1007/s00170-016-9632-y
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
A thermo-mechanical re-meshing model of friction stir welding (FSW) process of AA6082-T6 is used with a point tracking method for the determination of the final locations of the particles. The relations between the field variables and the material flows in the FSW process are discussed. Then the grain sizes after recrystallization are calculated. The comparison with the numerical and the experimental results in published literatures shows the validity of the proposed model. Based on the Zener-Hollomon parameter, the effects of strain rate and temperature on recrystallization are further discussed.
引用
收藏
页码：3567 / 3574
页数：8
相关论文
共 50 条
  • [41] Microstructural properties of a dissimilar friction stir welded thick aluminum aa6082-t6 and aa7075-t6 alloy
    Azeez, S. T.
    Akinlabi, E. T.
    Kailas, S. V.
    Brandi, S. D.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 18297 - 18306
  • [42] Microstructural and mechanical properties of dissimilar friction stir welds between AA6082-T6 and AA7075-T651
    Daniolos, N. M.
    Pantelis, D. I.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (9-12): : 2497 - 2505
  • [43] Microstructural and mechanical properties of dissimilar friction stir welds between AA6082-T6 and AA7075-T651
    N. M. Daniolos
    D. I. Pantelis
    The International Journal of Advanced Manufacturing Technology, 2017, 88 : 2497 - 2505
  • [44] Friction stir spot welding of AA6082-T6: influence of the most relevant process parameters and comparison with classic mechanical fastening techniques
    Fratini, L.
    Barcellona, A.
    Buffa, G.
    Palmeri, D.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (07) : 1111 - 1118
  • [45] Optimization of Dissimilar Friction Stir Welding Process Parameters of AA5083-H111 and AA6082-T6 by CCD-RSM Technique
    Kumar, H. M. Anil
    Raman, V. Venkata
    Shanmughanathan, S. P.
    John, Jacob
    Iqbal, U. Mohammed
    ADVANCES IN MANUFACTURING PROCESSES, ICEMMM 2018, 2019, : 49 - 60
  • [46] Comparative investigation of friction stir welds reinforced with graphene nanoplatelets and copper in AA6082-T6 alloy
    Biradar, Rahul
    Patil, Sachinkumar
    Sharma, Priyaranjan
    Fernandes, Filipe
    MATERIALS RESEARCH EXPRESS, 2024, 11 (10)
  • [47] Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing
    da Silva, J.
    Costa, J. M.
    Loureiro, A.
    Ferreira, J. M.
    MATERIALS & DESIGN, 2013, 51 : 315 - 322
  • [48] The microstructural evolution of friction stir welded AA6082-T6 aluminum alloy during cyclic deformation
    Hamada, A. S.
    Jarvenpaa, A.
    Ahmed, M. M. Z.
    Jaskari, M.
    Wynne, B. P.
    Porter, D. A.
    Karjalainen, L. P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 642 : 366 - 376
  • [49] Experimental investigation of crack propagation mechanism in refill friction stir spot joints of AA6082-T6
    Becker, Niklaas
    dos Santos, Jorge F.
    Klusemann, Benjamin
    ENGINEERING FRACTURE MECHANICS, 2024, 300
  • [50] TEMPERATURE DISTRIBUTION MODELING OF FRICTION STIR SPOT WELDING OF AA 6061-T6 USING FINITE ELEMENT TECHNIQUE
    Sathiya, P.
    Shanmugam, N. Siva
    Ramesh, T.
    Murugavel, R.
    MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2008, 4 (01) : 1 - 14
12345