Simulation of particle flow in a bell-less type charging system of a blast furnace using the discrete element method

被引：62

作者：

Zhang, Jianliang ^{[1
]}

Qiu, Jiayong ^{[1
]}

Guo, Hongwei ^{[1
]}

Ren, Shan ^{[1
]}

Sun, Hui ^{[1
]}

Wang, Guangwei ^{[1
]}

Gao, Zhengkai ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing 100083, Peoples R China

来源：

PARTICUOLOGY | 2014年 / 16卷

关键词：

Discrete element method; Blast furnace; Bell-less charging system; Granular flow; Size segregation; BURDEN DISTRIBUTION; SINTERED ORE; SOLID FLOW; MODEL; DEM; SEGREGATION; BEHAVIOR; HOPPERS; CHUTE; ANGLE;

D O I：

10.1016/j.partic.2014.01.003

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A three-dimensional model was established by the discrete element method (DEM) to analyze the flow and segregation of particles in a charging process in detail. The simulation results of the burden falling trajectory obtained by the model were compared with the industrial charging measurements to validate the applicability of the model. The flow behavior of particles from the weighing hopper to the top layer of a blast furnace and the heaping behavior were analyzed using this model. A radial segregation index (RSI) was used to evaluate the extent of the size segregation in the charging process. In addition, the influence of the chute inclination angle on the size segregation and burden profile during the charging process was investigated. (C) 2014 Published by Elsevier B.V. on behalf of Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences.

引用

页码：167 / 177

页数：11

共 50 条

[21] THE ESTIMATION OF BURDEN CIRCUMFERENTIAL DISTRIBUTION IN THE BLAST-FURNACE WITH CHUTE BELL-LESS TYPE CHARGING EQUIPMENT
BOLSHAKOV, VI
ROSLIK, NA
SHUTYLEV, FM
KOTOV, AP
STEEL IN TRANSLATION, 1993, 23 (02) : 5 - 8
[22] INTRODUCTION OF BELL-LESS TYPE CHARGING SYSTEM TO TOBATA 1 BLAST-FURNACE, NIPPON-STEEL-CORP
KURIHARA, K
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : S917 - S917
[23] Quantitative comparison of binary particle mass and size segregation between serial and parallel type hoppers of blast furnace bell-less top charging system
Xu, Yang
Xu, Jian
Sun, Chengfeng
Ma, Kaihui
Shan, Cheng
Wen, Liangying
Zhang, Shengfu
Bai, Chenguang
POWDER TECHNOLOGY, 2018, 328 : 245 - 255
[24] Comprehensive Mathematical Model for Particle Flow and Circumferential Burden Distribution in Charging Process of Bell-less Top Blast Furnace with Parallel Hoppers
Zhao, Guolei
Cheng, Shusen
Xu, Wenxuan
Li, Chao
ISIJ INTERNATIONAL, 2015, 55 (12) : 2566 - 2575
[25] Evaluating the efficiency of using bell-less charging apparatuses on blast furnaces
V. I. Bolshakov
Metallurgist, 2010, 54 : 153 - 157
[26] Evaluating the efficiency of using bell-less charging apparatuses on blast furnaces
Bolshakov, V. I.
METALLURGIST, 2010, 54 (3-4) : 153 - 157
[27] Numerical simulation of coke collapse and its optimization during burden charging at the top of bell-less blast furnace
Zhou, Heng
Wu, Jianlong
Hong, Zhibin
Wang, Li Pang
Wu, Shengli
Kou, Mingyin
Wang, Guangwei
Luo, Yiwa
POWDER TECHNOLOGY, 2021, 389 : 155 - 162
[28] DEVELOPMENT OF A MATHEMATICAL-MODEL TO ESTIMATE BURDEN DISTRIBUTION IN BELL-LESS TYPE CHARGING FOR BLAST-FURNACE
OKUNO, Y
MATSUZAKI, S
KUNITOMO, K
ISOYAMA, M
KUSANO, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (01): : 91 - 98
[29] Particle size segregation in hopper at a bell-less top blast furnace with parallel hoppers
KOU Mingyin
Baosteel Technical Research, 2010, 4(S1) (S1) : 14 - 14
[30] PARTICLE-SIZE SEGREGATION IN BELL-LESS TOP BUNKER OF BLAST-FURNACE
AMINAGA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : S913 - S913

← 1 2 3 4 5 →