A novel method of determining energy distribution and plasma diameter of EDM

被引：63
|
作者：
Zhang, Yanzhen [1 ]
Liu, Yonghong [1 ]
Shen, Yang [1 ]
Li, Zhen [1 ]
Ji, Renjie [1 ]
Cai, Baoping [1 ]
机构：
[1] China Univ Petr, Coll Electromech Engn, Qingdao 257061, Peoples R China
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2014年 / 75卷
关键词：
Electro discharge machining (EDM); Energy distribution; Plasma diameter; Finite element method (FEM); Crater; MATERIAL REMOVAL; SIMULATION; CATHODE; MODEL;
D O I：
10.1016/j.ijheatmasstransfer.2014.03.082
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This work proposed a novel method of determining the energy distribution and plasma diameter of EDM. The energy distribution and plasma diameter were determined by comparing the boundary of the melted material in the crater which was obtained by metallographic method and the isothermal curve of the thermal-physical model using finite element method (FEM). The results of this work indicated that the expansion of the plasma diameter must be taken into consideration in order to be more consistent with the actual EDM process. With this method, the energy distribution and plasma diameter in different dielectrics with different polarities were investigated. Comparison between the results of this work and the previously reports showed that the energy distributed into workpiece and plasma diameter can be determined by this new method. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：425 / 432
页数：8
相关论文
共 50 条
  • [31] METHOD OF MEASURING ENERGY DISTRIBUTION OF PARTICLES ESCAPING FROM A PLASMA
    BULYGINSKII, DG
    GALAKTIONOV, BV
    DOLMATOVA, KA
    OVSYANNIKOV, VA
    SOVIET PHYSICS-TECHNICAL PHYSICS, 1963, 8 (02): : 131 - &
  • [32] ABSORPTION METHOD FOR DETERMINING ENERGY DISTRIBUTION OF ELECTRONS INCIDENT ON AND TRANSMITTED THROUGH A SHIELD
    BARANOV, VF
    ZAITSEV, RY
    NALIVAEV, VI
    SOVIET ATOMIC ENERGY-USSR, 1970, 28 (03): : 302 - &
  • [33] Application of the Maximum Entropy Method for Determining a Sensitive Distribution in the Renewable Energy Systems
    Yari, Gholamhossein
    Farsani, Zahra Amini
    JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (04):
  • [34] Electrothermal energy distribution model for EDM drilling of HSLA steels
    J. M. Orona-Hinojos
    E. Hurtado-Delgado
    W. N. P. Hung
    M. Alvarez-Vera
    P. Pérez-Villanueva
    The International Journal of Advanced Manufacturing Technology, 2017, 93 : 3551 - 3565
  • [35] Electrothermal energy distribution model for EDM drilling of HSLA steels
    Orona-Hinojos, J. M.
    Hurtado-Delgado, E.
    Hung, W. N. P.
    Alvarez-Vera, M.
    Perez-Villanueva, P.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (9-12): : 3551 - 3565
  • [36] Optimum Method for Determining Weibull Distribution Parameters Used in Wind Energy Estimation
    Aras, Nil
    Erisoglu, Ulku
    Yildizay, Hasan D.
    PAKISTAN JOURNAL OF STATISTICS AND OPERATION RESEARCH, 2020, 16 (04) : 635 - 648
  • [37] A method for economically determining an interconnection line of a distributed energy resource in the distribution networks
    Hong S.-H.
    Jin Y.G.
    Kim S.W.
    Transactions of the Korean Institute of Electrical Engineers, 2019, 68 (08): : 951 - 957
  • [38] Numerical and experimental investigation into the energy distribution in powder mixed EDM
    Sahu, Deepti Ranjan
    Mandal, Amitava
    Kumar, Rakesh
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2024, 52 : 229 - 245
  • [39] Determining Distribution of a Seven-Dimensional Point Cluster with a Novel Hypersphere Method
    Davey, Nicolas A. C.
    Chase, J. Geoffrey
    Zhou, Cong
    Murphy, Liam
    IFAC PAPERSONLINE, 2024, 58 (24): : 596 - 601
  • [40] A new method of investigation the characteristic of the heat flux of EDM plasma
    Zhang, Y.
    Liu, Y.
    Shen, Y.
    Li, Z.
    Ji, R.
    Wang, F.
    PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 450 - 455
12345