Thermodynamic Analysis of Ejector as an Expansion Device on Split-type Air Conditioner Using R410A as Working Fluid

被引：1
|
作者：
Sumeru [1 ]
Nasution, Henry [2 ]
An, Farid Nasir [1 ]
机构：
[1] Univ Teknol Malaysia, Dept Thermodynam & Fluid Mech, Skudai 81310, Johor, Malaysia
[2] Univ Teknol Malaysia, Fac Mech Engn, Automot Dev Ctr, Skudai 801310, Malaysia
来源：
ADVANCES IN APPLIED MECHANICS AND MATERIALS | 2014年 / 493卷
关键词：
Ejector; R410A; expansion device; capillary tube; air conditioner; REFRIGERATION CYCLE; 2-PHASE EJECTOR; PERFORMANCE;
D O I：
10.4028/www.scientific.net/AMM.493.227
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Typically the split-type air conditioner uses a capillary tube as expansion device. To enhance the performance of the system, an ejector can be applied as expansion device to replace capillary tube. Based on the numerical modeling, the coefficient of performance (COP) of standard cycle using R410A as working fluid was slightly lower than that of R22. The use of an ejector as an expansion device on a split-type air conditioner using R410 increased the COP by 10.8%. Also, R410A has a lower total GWP impact compared with R22, which reduce negative impact on the environment.
引用
收藏
页码：227 / +
页数：2
相关论文
共 45 条
  • [11] Experimental study of an R290 split-type air conditioner using a falling film condenser
    Ruan, Jiangao
    Liu, Jinping
    Xu, Xiongwen
    Chen, Jianxun
    Li, Guoli
    APPLIED THERMAL ENGINEERING, 2018, 140 : 325 - 333
  • [12] Thermodynamic Analysis of Two-Phase Ejector as Expansion Device with Dual Evaporator Temperatures on Split Type Air Conditioning Systems
    Arsana, M. E.
    Kusuma, I. G. B. Wijaya
    Sucipta, M.
    Suamir, I. N.
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH AND APPLICATION, 2019, 494
  • [13] Performance optimization of an R410A air-conditioner with a dual evaporator ejector cycle based on cooling seasonal performance factor
    Kim, Sunjae
    Jeon, Yongseok
    Chung, Hyun Joon
    Kim, Yongchan
    APPLIED THERMAL ENGINEERING, 2018, 131 : 988 - 997
  • [14] The two-fluid numerical simulation of the inner flow of a indoor split-type air conditioner
    Xue, Yong-Fei
    Gan, Jia-Ye
    Wu, Ke-Qi
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2007, 28 (02): : 235 - 237
  • [15] Effect of Compressor-Discharge-Cooler Heat-Exchanger Length Using Condensate Water on the Performance of a Split-Type Air Conditioner Using R32 as Working Fluid
    Sumeru, Kasni
    Pramudantoro, Triaji Pangripto
    Setyawan, Andriyanto
    Muliawan, Rizki
    Tohir, Toto
    bin Sukri, Mohamad Firdaus
    ENERGIES, 2022, 15 (21)
  • [16] Experimental investigation on two-phase flow noise characteristics of R410A through electronic expansion valve of multi-split air conditioner
    Zhou, Shaohua
    Zhan, Feilong
    Ding, Guoliang
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2023, 146 : 327 - 340
  • [17] Drop-In Tests and Simulation Results of R410A & Blends in an R32-Dedicated Mini-Split Air Conditioner
    Kataoka, Osami
    Ota, Fumio
    Nishikawa, Kazuyuki
    2016 ASHRAE ANNUAL CONFERENCE PAPERS, 2016,
  • [18] Performance of A R22 split-air-conditioner when retrofitted with ozone friendly refrigerants (R410A and R417A)
    Bolaji, Bukola Olalekan
    JOURNAL OF ENERGY IN SOUTHERN AFRICA, 2012, 23 (03) : 16 - 22
  • [19] Improving quick cooling performance of a R410A split air conditioner during startup by actively controlling refrigerant mass migration
    Li, Jinbo
    Deng, Weishi
    Yan, Gang
    APPLIED THERMAL ENGINEERING, 2018, 128 : 141 - 150
  • [20] Feasibility analysis for intermediated fluid type LNG vaporizers using R32 and R410A considering fluid properties
    Higashi, Kosuke
    Kondou, Chieko
    Koyama, Shigeru
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2020, 118 : 325 - 335
12345