Clinching and Torsional Ultrasonic Welding - An Innovative Process Combination for Joining Metal-Polymer Hybrid Structures

被引：1

作者：

Brueckner, Eric ^{[1
]}

Georgi, Wolf ^{[2
]}

Gehde, Michael ^{[1
]}

Mayr, Peter ^{[2
]}

机构：

[1] Tech Univ Chemnitz, Inst Mat Handling Conveying & Plast Engn, Plast Engn, Reichenhainer Str 70, D-09126 Chemnitz, Germany

[2] Tech Univ Chemnitz, Inst Joining & Assembly Technol, Welding Engn, Reichenhainer Str 70, D-09126 Chemnitz, Germany

来源：

PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS | 2019年 / 2055卷

关键词：

D O I：

10.1063/1.5084900

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Due to the optimized local material adaption by using multi-material-structures, the final part properties can reach maximized performance and efficiency. This fact correlates with a rising demand for processes which join dissimilar materials (e.g. metal-polymer, thermoplastic-thermoset or incompatible thermoplastics) reliably. The present study deals with an innovative process combination of clinching and hot-melt adhesive bonding for joining fiber-reinforced polyamide (PA6-GF30) to steel. The energy input for the hot-melt adhesive bonding is performed by torsional ultrasonic welding. The study was aimed to analyze design variations of the ultrasonic weld seam to reach steady joint properties in spite of unsteady manufacturing conditions and to minimize interactions between clinching and ultrasonic welding. However, the hot-melt adhesive bonding process has always to keep the geometric preconditions for the following clinching process.

引用

页数：5

共 50 条

[21] Single-side resistance spot joining of polymer-metal hybrid structures
Konstantin Szallies
Martin Bielenin
Klaus Schricker
Jean Pierre Bergmann
Christian Neudel
Welding in the World, 2019, 63 : 1145 - 1152
[22] Ultrasonic joining: A novel direct-assembly technique for metal-composite hybrid structures
Feistauer, E. E.
Guimaraes, R. P. M.
Ebel, T.
dos Santos, J. F.
Amancio-Filho, S. T.
MATERIALS LETTERS, 2016, 170 : 1 - 4
[23] An experimental study on mechanical properties of a novel hybrid metal-polymer joining technology based on a reaction between isocyanate and hydroxyl groups
Izadi, Omid
Mosaddegh, Peiman
Silani, Mohammad
Dinari, Mohammad
JOURNAL OF MANUFACTURING PROCESSES, 2017, 30 : 217 - 225
[24] On the feasibility of a friction-based staking joining method for polymer-metal hybrid structures
Abibe, A. B.
Sonego, M.
dos Santos, J. F.
Canto, L. B.
Amancio-Filho, S. T.
MATERIALS & DESIGN, 2016, 92 : 632 - 642
[25] An alternative additive manufacturing-based joining method to make Metal/Polymer hybrid structures
Ozlati, A.
Movahedi, M.
Tamizi, M.
Tartifzadeh, Z.
Alipour, S.
JOURNAL OF MANUFACTURING PROCESSES, 2019, 45 : 217 - 226
[26] Effect of Surface Microstructure on Conjugation behaviors of Joining Process for Polymer-Metal Hybrid Material
Suenaga, Hiroto
Ito, Hiroshi
Horiuchi, Wataru
DESIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2016, : 123 - 130
[27] An investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid joints
Feistauer, E. E.
dos Santos, J. F.
Amancio-Filho, S. T.
WELDING IN THE WORLD, 2020, 64 (09) : 1481 - 1495
[28] An investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid joints
E. E. Feistauer
J. F. dos Santos
S. T. Amancio-Filho
Welding in the World, 2020, 64 : 1481 - 1495
[29] A Comprehensive Technical Review of the Friction Stir Welding of Metal-to-Polymer Hybrid Structures
Barakat, Ali A.
Darras, Basil M.
Nazzal, Mohammad A.
Ahmed, Aser Alaa
POLYMERS, 2023, 15 (01)
[30] A new refill friction spot welding process for aluminum/polymer composite hybrid structures
Pabandi, Hossein Karami
Movahedi, Mojtaba
Kokabi, Amir Hossein
COMPOSITE STRUCTURES, 2017, 174 : 59 - 69

← 1 2 3 4 5 →