Effects of injector valve movement on diesel spray characteristics under short full valve opening

被引:1
|
作者
Kawaharada, Noritsune [1 ]
Sakaguchi, Daisaku [1 ]
Ueki, Hironobu [1 ]
Ishida, Masahiro [1 ]
机构
[1] Nagasaki Univ, Grad Sch Engn, Nagasaki 8528521, Japan
来源
关键词
Laser-aided diagnostics; Atomization; Nozzle; Liquid droplet; Fuel injection; Diesel engine; NEEDLE LIFT; FLOW; COMBUSTION; NOZZLES; ENGINE;
D O I
10.1299/jtst.2015jtst0025
中图分类号
O414.1 [热力学];
学科分类号
摘要
A laser 2-focus velocimeter (L2F) was used for the measurement of diesel fuel sprays. Temporal and spatial changes in the number, velocity and size of droplets inside sprays were investigated near the nozzle orifice and were correlated with the needle valve lift of the injector nozzle. The L2F had a micro-scale probe which consists of two foci. The focal diameter was about 3 mu m, and the distance between two foci was 17 mu m. The data sampling rate of the L2F system was markedly high as 15MHz. Fuel sprays were injected intermittently into the atmosphere by using a common rail injector. The orifice diameter of the injector nozzle was 0.112mm and the rail pressure was 40MPa. The periods of solenoid energizing was set at 2.0ms. Measurement positions were located at 10mm downstream from the exit of the nozzle orifice. The results show that droplets mainly existed in the region off the spray center in the early injection period and concentrated at the spray center in the middle of injection period. Temporal changes in the number of droplets near the spray center were strongly affected by the needle lift and there in the relatively wide region were affected by the injection rate. Temporal changes in the droplet velocity near the spray center were strongly affected by the injection rate. The luminance distribution of the spray image was similar to the distribution of the number of droplets multiplied by the square of droplet size.
引用
收藏
页数:12
相关论文
共 50 条
  • [31] The experimental investigation on the diesel spray characteristics with various injector nozzle parameters
    School of Mechanical Electronic and Control Engineening Beijing Jiaotong University, Beijing
    100044, China
    Kung Cheng Je Wu Li Hsueh Pao, 4 (907-911):
  • [32] Nozzle flow and spray characteristics from VCO diesel injector nozzles
    Gavaises, M
    Arcoumanis, C
    Roth, H
    Choi, YS
    Theodorakakos, A
    THERMO- AND FLUID DYNAMIC PROCESSES IN DIESEL ENGINES 2, 2004, : 31 - 48
  • [33] Working Process Simulation Analysis on an Diesel Injector with Different Needle Valve Parameters
    Li, Yulan
    An, Xiangbi
    Jiang, Dahai
    ASIASIM 2012, PT III, 2012, 325 : 213 - 221
  • [34] Estimation of fuel consumption based on data from opening fuel injector valve
    Harantova, Veronika
    Otahalova, Zuzana
    Kasanicky, Martin
    13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (TRANSCOM 2019), 2019, 40 : 236 - 243
  • [35] Effects of delivery valve spring rigidity and opening pressure on bubbles in diesel fuel injection system
    Zhao, Chang-Pu
    Liu, Jian-Xin
    He, Yong-Ling
    Zong, Yong-Ping
    Zhao, Zhi-He
    Deng, Ben-Du
    Li, Min
    Yan, Zhi-Hua
    Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2002, 20 (02):
  • [36] Effects of early intake valve closing on characteristics of cyclic variations in diesel engine
    Zhang J.
    Chang Y.
    Xie Z.
    Yan S.
    Wang Z.
    Xie, Zongfa (zongfax@sdu.edu.cn), 1600, Chinese Society for Internal Combustion Engines (34): : 401 - 408
  • [37] Effects of valve opening on direct water hammer pressure characteristics in PMMA pipelines
    Xiaoying Zhang
    Shaokang Bian
    Hui Wang
    Xuanwen Jia
    Chuan Wang
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45
  • [38] Effects of valve opening on direct water hammer pressure characteristics in PMMA pipelines
    Zhang, Xiaoying
    Bian, Shaokang
    Wang, Hui
    Jia, Xuanwen
    Wang, Chuan
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2023, 45 (08)
  • [39] Development of micro-diesel injector nozzles via microelectromechanical systems technology and effects on spray characteristics
    Baik, S
    Blanchard, JP
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2003, 125 (02): : 427 - 434
  • [40] Movement characteristics of hydraulic variable valve train with early intake valve closing
    Zhong B.
    Hong W.
    Jin Z.-H.
    Su Y.
    Xie F.-X.
    Zhang F.-W.
    Xie, Fang-Xi (xiefx2011@jlu.edu.cn), 2018, Editorial Board of Jilin University (48): : 727 - 734