Fracture Toughness of Treated OPEFB Filled Polymer Nanocomposites at Different Clay Loading

被引：0

作者：

Fadzil, Nur Amanina Mohd ^{[1
]}

Kalam, Anizah ^{[1
]}

Jumahat, Aidah ^{[1
]}

Taib, Yakub Md ^{[1
]}

Razak, Noorrul Wahida Abdul ^{[1
]}

机构：

[1] Univ Teknol MARA UiTM, Fac Mech Engn, Shah Alam, Malaysia

来源：

APPLIED MECHANICS, FLUID AND SOLID MECHANICS | 2014年 / 871卷

关键词：

Oil palm empty fruit bunch; Polypropylene; Polymer nanocomposites; Fracture toughness;

D O I：

10.4028/www.scientific.net/AMR.871.184

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Two different clay loadings were added to OPEFB/PP/MAPP which was 7 phr and 10 phr in order to see its effect on the fracture toughness. Standard dimension of samples was prepared for 180 mu m, 355 mu m and 355 mu m treated with 1% NaOH. The result showed that 7 phr clay contents had the highest fracture toughness of 1.16 MPa.m(1/2). Alkali treatment on OPEFB fiber gave 7% improvement of fracture toughness for samples with 7 phr PPnanoclay loading. SEM images show the improvement of bonding between the fibers and the matrix upon alkali treatment.

引用

页码：184 / 188

页数：5

共 50 条

[31] Fracture toughness of graphene/polymer nanocomposites: Well dispersion, agglomeration and toughening mechanisms
Zeinedini, Afshin
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 131
[32] On the toughness of thermoplastic polymer nanocomposites as assessed by the essential work of fracture (EWF) approach
Karger-Kocsis, J.
Khumalo, V. M.
Barany, T.
Meszaros, L.
Pegoretti, A.
COMPOSITE INTERFACES, 2013, 20 (06) : 395 - 404
[33] Mixed mode (I plus II) fracture toughness of polymer nanoclay nanocomposites
Zappalorto, Michele
Salviato, Marco
Quaresimin, Marino
ENGINEERING FRACTURE MECHANICS, 2013, 111 : 50 - 64
[34] On the role of thermal stress in fracture toughness of polymer nanocomposites: A multiscale theoretical model
Zeinedini, Afshin
JOURNAL OF THERMAL STRESSES, 2025,
[35] Fracture toughness of calcium hydroxyapatite and spinel at different humidities and loading rates
van der Laag, NJ
van Dijk, AJM
Dortmans, LJMG
de With, G
EURO CERAMICS VII, PT 1-3, 2002, 206-2 : 1599 - 1602
[36] Feasibility of Plasma Treated Clay in Clay/Polymer Nanocomposites Powders for use Laser Sintering (LS)
Almansoori, Alaa
Seabright, Ryan
Majewski, C.
Rodenburg, C.
3RD INTERNATIONAL CONFERENCE ON STRUCTURAL NANO COMPOSITES (NANOSTRUC2016), 2017, 195
[37] Molecular dynamics simulation study of a fracture of filler-filled polymer nanocomposites
Hagita, Katsumi
Morita, Hiroshi
Takano, Hiroshi
POLYMER, 2016, 99 : 368 - 375
[38] Fracture model for predicting tensile strength and fracture toughness of concrete under different loading rates
Yang, Shutong
Wang, Mingxin
Lan, Tian
Liu, Shutong
Sun, Zhongke
CONSTRUCTION AND BUILDING MATERIALS, 2023, 365
[39] The influence of clay and elastomer concentration on the morphology and fracture energy of preformed acrylic rubber dispersed clay filled epoxy nanocomposites
Balakrishnan, S
Start, PR
Raghavan, D
Hudson, SD
POLYMER, 2005, 46 (25) : 11255 - 11262
[40] PLANE-STRAIN FRACTURE-TOUGHNESS OF EPOXIES AT DIFFERENT LOADING RATES
HOLLMANN, K
HAHN, HT
POLYMER ENGINEERING AND SCIENCE, 1989, 29 (08): : 523 - 530

← 1 2 3 4 5 →