Effect of Different Cooling Regimes on the Mechanical Properties of Cementitious Composites Subjected to High Temperatures

被引：57
|
作者：
Yu, Jiangtao [1 ]
Weng, Wenfang [1 ]
Yu, Kequan [1 ]
机构：
[1] Tongji Univ, Coll Civil Engn, Shanghai 200092, Peoples R China
来源：
SCIENTIFIC WORLD JOURNAL | 2014年
关键词：
CONCRETE; STRENGTH; MICROSTRUCTURE; PERFORMANCE; STRAIN; FIBER;
D O I：
10.1155/2014/289213
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
The influence of different cooling regimes (quenching in water and cooling in air) on the residual mechanical properties of engineered cementitious composite (ECC) subjected to high temperature up to 800 degrees C was discussed in this paper. The ECC specimens are exposed to 100, 200, 400, 600, and 800 degrees C with the unheated specimens for reference. Different cooling regimens had a significant influence on the mechanical properties of postfire ECC specimens. The microstructural characterization was examined before and after exposure to fire deterioration by using scanning electron microscopy (SEM). Results from the microtest well explained the mechanical properties variation of postfire specimens.
引用
收藏
页数：7
相关论文
共 50 条
  • [41] Mechanical properties of high-ductility cementitious composites with methyl silicone oil
    Zhang, Yunhua
    Liu, Zhiyi
    Liu, Zhichao
    Yao, Liping
    MAGAZINE OF CONCRETE RESEARCH, 2020, 72 (14) : 747 - 756
  • [42] The effects of high temperature on mechanical properties of cementitious composites reinforced with polymeric fibers
    Cavdar, Ahmet
    COMPOSITES PART B-ENGINEERING, 2013, 45 (01) : 78 - 88
  • [43] A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites
    Cavdar, Ahmet
    COMPOSITES PART B-ENGINEERING, 2012, 43 (05) : 2452 - 2463
  • [44] The investigating on mechanical properties of engineered cementitious composites with high ductility and low cost
    Ma, Kai
    Deng, Hanwen
    Guo, Xiaosheng
    Yin, Jian
    Zhao, Yibin
    JOURNAL OF BUILDING ENGINEERING, 2022, 57
  • [45] Effect of temperatures on the mechanical and morphological properties of polyphenylene sulfide composites
    Park, HJ
    Chun, BC
    POLYMER BULLETIN, 1996, 37 (01) : 103 - 110
  • [46] Study on the interfacial shear performance between engineered cementitious composites and concrete after being subjected to high temperatures
    Shang, Xing-yan
    Xu, Fang-zheng
    Yu, Jiang-tao
    Li, Ling-zhi
    Lu, Zhou-dao
    JOURNAL OF BUILDING ENGINEERING, 2021, 44
  • [47] RETRACTED: A scientometric analysis on mechanical and microstructural characterization of geopolymer composites subjected to high temperatures
    Raza, Ali
    El Ouni, Mohamed Hechmi
    Abdellatif, Selmi
    Arshad, Muhammad
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 396
  • [48] Effect of temperatures on the mechanical and morphological properties of polyphenylene sulfide composites
    Park, H.-J.
    Chun, B.C.
    Polymer Bulletin (Berlin), 1996, 37 (01):
  • [49] Study of constitutive mode and dynamic mechanical properties of composites at different temperatures
    Jixie Kexue Yu Jishu, 1 (125-126, 129):
  • [50] Effect of polyethylene fiber content on physical and mechanical properties of engineered cementitious composites
    Wang, Yichao
    Liu, Feichi
    Yu, Jiangtao
    Dong, Fangyuan
    Ye, Junhong
    Construction and Building Materials, 2020, 251
12345