Microstructure of High Cr-Alloyed Sintered Steel Prediction and Analysis

被引：0

作者：

Shvab, Ruslan ^{[1
]}

Hryha, Eduard ^{[2
]}

Shykula, Petro ^{[3
]}

Dudrova, Eva ^{[1
]}

Bergman, Ola ^{[4
]}

Bengtsson, Sven ^{[4
]}

机构：

[1] Inst Mat Res SAS, Watsonova 47, Kosice 04001, Slovakia

[2] Chalmers, Dept Mat & Mfg Technol, SE-412 96 Gothenburg, Sweden

[3] Miba Sinter Slovakia Sro, Dolny Kubin, Slovakia

[4] HOganas AB, Hoganas, Sweden

来源：

METALLOGRAPHY XV | 2014年 / 782卷

关键词：

sintered steel; Thermo-Calc and JMatPro calculations; surface oxides; XPS analysis; NI; POWDERS;

D O I：

10.4028/www.scientific.net/MSF.782.473

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Study of microstructure of high Cr-alloyed sintered austenitic stainless steel was performed in few stages XPS analysis of powder surface, theoretical prediction of microstructure by Thermo-Calc and JMatPro software and metallographic observation of sintered material. XPS analysis showed presence of thin iron oxide layer on the surface of powder particles and oxide "islands" formed by Si, Mn and Cr. Theoretical prediction made by Thermo-Calc and JMatPro calculations showed presence of austenite with chromium carbides and carbonitrides in equilibrium state. Both predictions are in good agreement. Metallographic observation of sintered material showed that microstructure contains small austenitic grains with size of 3-5 mu m with fine carbides (1-2 mu m) and carbonitrides distributed mostly on grain boundaries. Metallographic study of material confirmed theoretical predictions.

引用

页码：473 / +

页数：2

共 50 条

[31] Effect of alloying contents and processing factors on the microstructure and homogenization of Si alloyed Cr-Mo sintered steels
Azadbeh, Maziyar
Ahmadi, Naghi Parvini
CURRENT APPLIED PHYSICS, 2009, 9 (04) : 777 - 782
[32] Mechanical Properties and Microstructure Evaluation of High Manganese Steel alloyed with vanadium
Mahlami, C. S.
Pan, X.
INTERNATIONAL CONFERENCE ON FUNCTIONAL MATERIALS, CHARACTERIZATION, SOLID STATE PHYSICS, POWER, THERMAL AND COMBUSTION ENERGY (FCSPTC-2017), 2017, 1859
[33] Mechanical properties of Cr-alloyed MoSi2-based nanocomposite coatings with a hierarchical structure
Xu, Jiang
Wu, Jia Di
Li, Zhengyang
Munroe, Paul
Xie, Zong-Han
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 565 : 127 - 133
[34] Microstructure and creep properties of high Cr resisting weld metal alloyed with Co
Xue Wang
Liang-fei Zhan
Qian-gang Pan
Zhi-jun Liu
Hong Liu
Yong-shun Tao
Journal of Zhejiang University-SCIENCE A, 2010, 11 : 756 - 760
[35] Radial crushing strength and microstructure of molybdenum alloyed sintered steels
Candela, N
Plaza, R
Rosso, M
Velasco, F
Torralba, JM
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 119 (1-3) : 7 - 13
[36] Microstructure and creep properties of high Cr resisting weld metal alloyed with Co
Xue WANG1
Journal of Zhejiang University-Science A(Applied Physics & Engineering), 2010, 11 (10) : 756 - 760
[37] Microstructure and creep properties of high Cr resisting weld metal alloyed with Co
Wang, Xue
Zhan, Liang-fei
Pan, Qian-gang
Liu, Zhi-jun
Liu, Hong
Tao, Yong-shun
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 2010, 11 (10): : 756 - 760
[38] Corrosion resistance of laser clad Cr-alloyed Ni2Si/NiSi intermetallic coatings
Cai, LX
Wang, HM
Wang, CM
SURFACE & COATINGS TECHNOLOGY, 2004, 182 (2-3): : 294 - 299
[39] The effect of boron liquid phase sintering on properties of Ni-, Mo- and Cr-alloyed structural steels
Selecká, M
Salak, A
Danninger, H
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 141 (03) : 379 - 384
[40] Microstructure and corrosion resistance behavior of Cr-Nb alloyed layer on low carbon steel
Zhu, Y-M.
Zhang, P-Z.
Wei, X-F.
Wei, D-B.
Chen, X-H.
Zhou, P.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2015, 66 (12): : 1480 - 1487

← 1 2 3 4 5 →