Microstructure and mechanical properties of ZrB2-SiC nanocomposite ceramic

被引：46
|
作者：
Liu, Qiang [1 ]
Han, Wenbo [1 ]
Hu, Ping [1 ]
机构：
[1] Harbin Inst Technol, Ctr Composite Mat, Harbin 150001, Peoples R China
来源：
SCRIPTA MATERIALIA | 2009年 / 61卷 / 07期
关键词：
Intragranular nanostructure; Mechanical properties; Microstructure; Fracture toughness; Nanocomposite;
D O I：
10.1016/j.scriptamat.2009.05.041
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A ZrB2-SiC nanocomposite ceramic in which 20 vol.% nanosized SiC powder was introduced into a ZrB2 matrix was fabricated by hot-pressing at 1900 degrees C for 60 min under a 30 MPa uniaxed load. The composite microstructure showed intragranular nanostructures that were peculiar to this material. Investigation of the mechanical properties revealed a flexural strength of 930 +/- 28 MPa and a fracture toughness of 6.5 +/- 0.3 MPa m(1/2). These improved mechanical properties were strongly dependent on the formation of the unusual intragranular nanostructures. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：690 / 692
页数：3
相关论文
共 50 条
  • [41] Ablative properties of laminated ZrB2-SiC ceramic modified by SiC whisker in oxyacetylene environment
    Ma, Xuefei
    Wei, Chuncheng
    Liu, Ruixiang
    Li, Shuang
    Zhang, Zhongya
    Liu, Lanyong
    Wang, Peng
    Wang, Yishan
    CORROSION SCIENCE, 2021, 182
  • [42] The influence of ZrB2-SiC powders mechanical treatment on the structure of sintered ceramic composites
    Buyakova, S.
    Burlachenko, A.
    Mirovoi, Yu
    Sevostiyanova, I.
    Kulkov, S.
    INTERNATIONAL SEMINAR ON INTERDISCIPLINARY PROBLEMS IN ADDITIVE TECHNOLOGIES, 2016, 140
  • [43] Thermophysical properties of ZrB2 and ZrB2-SiC ceramics
    Zimmermann, James W.
    Hilmas, Gregory E.
    Fahrenholtz, William G.
    Dinwiddie, Ralph B.
    Porter, Wallace D.
    Wang, Hsin
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2008, 91 (05) : 1405 - 1411
  • [44] Mechanical and Thermal Properties of Hot-Pressed ZrB2-SiC Composites
    Chakraborty, Shirshendu
    Debnath, Debashish
    Mallick, Azizur Rahaman
    Das, Probal Kumar
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (13): : 6277 - 6284
  • [45] Mechanical Characterization of Annealed ZrB2-SiC Composites
    Watts, Jeremy
    Hilmas, Greg
    Fahrenholtz, William G.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2013, 96 (03) : 845 - 851
  • [46] Ultrahigh-Temperature Ceramic Based on ZrB2-SiC: Preparation and Main Properties
    Sokolov, P. S.
    Arakcheev, A. V.
    Mikhal'chik, I. L.
    Plyasunkova, L. A.
    Tkachev, A. V.
    Anuchin, S. A.
    Kordo, M. N.
    Lanin, A. V.
    Zabezhailov, A. O.
    Kelina, I. Yu.
    Rusin, M. Yu.
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2017, 58 (01) : 46 - 52
  • [47] Laminated ZrB2-SiC ceramic with improved strength and toughness
    Zhou, Peng
    Hu, Ping
    Zhang, Xinghong
    Han, Wenbo
    SCRIPTA MATERIALIA, 2011, 64 (03) : 276 - 279
  • [48] Mechanical properties of ZrB2-SiC ceramics prepared by polymeric precursor route
    He, Jiabei
    Cao, Yejie
    Zhang, Yinxia
    Wang, Yiguang
    CERAMICS INTERNATIONAL, 2018, 44 (06) : 6520 - 6526
  • [49] Brazing of ZrB2-SiC ceramic with amorphous CuTiNiZr filler
    Wang, Gang
    Xiao, Ping
    Huang, Zhongjia
    He, Rujie
    CERAMICS INTERNATIONAL, 2016, 42 (04) : 5130 - 5135
  • [50] Room temperature fatigue of ZrB2-SiC ceramic composites
    Lugovy, M.
    Orlovskaya, N.
    Neubert, M.
    Aneziris, C. G.
    Graule, T.
    Kuebler, J.
    CERAMICS INTERNATIONAL, 2013, 39 (08) : 9187 - 9194
12345