Modelling of heat and mass transfer in a tunnel dryer

This work presents a numerical model for heat and mass transfer of granular products in a fixed-bed tunnel dryer. The drying process is simulated under real operating conditions based on a thin layer model and experimental drying kinetics. A simplified heat and mass transfer numerical model is developed based on the governing equations and the drying rate of a thin layer bed of granular products. The obtained system of non-linear partial differential equations is numerically solved by a finite volume method. The turbulent airflow and granular bed convection coefficient as well as the effective conductivity are estimated using the turbulent airflow over flat-plate correlations. Simulations are compared with experimental data from drying of grapes in a thin layer model. In order to study the effects of the air inlet conditions on the relative moisture content and the drying time and therefore to optimise the tunnel dryer operation, the influences of different parameters essentially the air flow characteristics and the fixed-bed dryer length are examined. The numerical code allows establishing the drying front propagation for several operating conditions. (c) 2006 Elsevier Ltd. All rights reserved.