High-cycle fatigue properties of beta Ti alloy 55Ti-30Nb-10Ta-5Zr, gum metal

被引：4
|
作者：
Akita, M. [1 ]
Nakajima, M. [2 ]
Uematsu, Y. [3 ]
Tokaji, K. [3 ]
Kojima, T. [4 ]
机构：
[1] Gifu Univ, Fac Engn, Gifu 5011193, Japan
[2] Toyota Natl Coll Technol, Dept Mech Engn, Toyota 4718525, Japan
[3] Gifu Univ, Dept Mech Engn, Gifu 5011193, Japan
[4] Okuma Corp LTD, Oguchi, Aichi 4800193, Japan
来源：
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2014年 / 37卷 / 11期
关键词：
beta titanium alloy; corrosion fatigue; crack growth; crack initiation; fatigue; slip deformation; S-N diagram; PLASTIC-DEFORMATION; TITANIUM; MECHANISM; BEHAVIOR; EVOLUTION;
D O I：
10.1111/ffe.12201
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper describes the fatigue properties of the beta titanium alloy 55Ti-30Nb-10Ta-5Zr, generally referred to as 'Gum Metal'. Rotating bending fatigue tests have been performed in laboratory air and in a 3% NaCl aqueous solution. The results obtained were compared with those of a conventional beta titanium alloy, Ti-22V-4Al. In tensile tests, 55Ti-30Nb-10Ta-5Zr indicated elasticity and microplasticity in the elastic region. Thus, the elastic modulus slightly decreased with an increasing strain, and the work hardening was minimal during plastic deformation. The mechanical properties of both of the alloys were comparable. The fatigue strength of 55Ti-30Nb-10Ta-5Zr in laboratory air was higher than that of Ti-22V-4Al, which could be attributed to the higher fatigue crack initiation resistance of 55Ti-30Nb-10Ta-5Zr than Ti-22V-4Al, while the resistance to small fatigue crack growth was similar. The fatigue strength of 55Ti-30Nb-10Ta-5Zr in laboratory air and in the 3% NaCl aqueous solution was analogous. In addition, corrosion pits were not observed in the run-out specimen in the 3% NaCl aqueous solution, indicating a high resistance of 55Ti-30Nb-10Ta-5Zr against corrosion fatigue.
引用
收藏
页码：1223 / 1231
页数：9
相关论文
共 50 条
  • [41] Mechanical properties and microstructure of Ti-35.5Nb-5.7Ta beta alloy
    Bartakova, S.
    Prachar, P.
    Dvorak, I
    Hruby, V
    Vanek, J.
    Pospichal, M.
    Svoboda, E.
    Martikan, A.
    Konecna, H.
    Sedlak, I
    BRATISLAVA MEDICAL JOURNAL-BRATISLAVSKE LEKARSKE LISTY, 2015, 116 (02): : 88 - 92
  • [42] Corrosion resistance, mechanical properties, fatigue properties, and tissue response of Ti-15Zr-4Nb-4Ta alloy
    Okazaki, Yoshimitsu
    Gotoh, Emiko
    TITANIUM, NIOBIUM, ZIRCONIUM, AND TANTALUM FOR MEDICAL AND SURGICAL APPLICATIONS, 2006, 1471 : 120 - +
  • [43] High-cycle fatigue properties and fatigue crack initiation behavior of Ti-5%Al-2.5%Sn ELI alloy at cryogenic temperatures
    Ono, Y.
    Demura, M.
    Yuri, T.
    Ogata, T.
    Matsuoka, S.
    Hori, S.
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 54: TRANSACTIONS OF THE INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE - ICMC, 2008, 986 : 139 - +
  • [44] Electrochemical properties, chemical composition and thickness of passive film formed on novel Ti-20Nb-10Zr-5Ta alloy
    Milosev, Ingrid
    Zerjav, Gregor
    Moreno, Jose Maria Calderon
    Popa, Monica
    ELECTROCHIMICA ACTA, 2013, 99 : 176 - 189
  • [45] The effect of lamellar morphology on tensile and high-cycle fatigue behavior of orthorhombic Ti-22Al-27Nb alloy
    Masuo Hagiwara
    Satoshi Emura
    Aya Araoka
    Seung Jin Yang
    Soo Woo Nam
    Metallurgical and Materials Transactions A, 2004, 35 : 2161 - 2170
  • [46] The effect of lamellar morphology on tensile and high-cycle fatigue behavior of orthorhombic Ti-22Al-27Nb alloy
    Hagiwara, M
    Araoka, A
    Yang, SJ
    Emura, S
    Nam, SW
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (07): : 2161 - 2170
  • [47] Microstructure, mechanical, and anticorrosive properties of a new Ti-20Nb-10Zr-5Ta alloy based on nontoxic and nonallergenic elements
    Popa, Monica
    Vasilescu, Ecaterina
    Drob, Paula
    Raducanu, Doina
    Moreno, Jose Maria Calderon
    Ivanescu, Steliana
    Vasilescu, Cora
    Drob, Silviu Iulian
    METALS AND MATERIALS INTERNATIONAL, 2012, 18 (04) : 639 - 645
  • [48] Microstructure, mechanical, and anticorrosive properties of a new Ti-20Nb-10Zr-5Ta alloy based on nontoxic and nonallergenic elements
    Monica Popa
    Ecaterina Vasilescu
    Paula Drob
    Doina Raducanu
    Jose Maria Calderon Moreno
    Steliana Ivanescu
    Cora Vasilescu
    Silviu Iulian Drob
    Metals and Materials International, 2012, 18 : 639 - 645
  • [49] Influence of oxygen and plastic deformation on the microstructure and the hardness of a Ti-Nb-Ta-Zr-O Gum Metal
    da Silva, Murillo Romero
    Gargarella, Piter
    Plaine, Athos Henrique
    Pauly, Simon
    Bolfarini, Claudemiro
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 828
  • [50] Mechanical and biological properties of newly designed Ti-Nb-Ta-Zr system alloy
    Niinomi, M
    Kuroda, D
    Fukunaga, K
    Fukui, H
    Suzuki, A
    Hasegawa, J
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2001, : 598 - 603
12345