Secondary Cooling in the Direct-Chill Casting of Magnesium Alloy AZ31

被引：26
|
作者：
Caron, E. [1 ]
Wells, M. A. [1 ]
机构：
[1] Univ Waterloo, Dept Mech & Mechatron Engn, Waterloo, ON N2L 3G1, Canada
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | 2009年 / 40卷 / 04期
关键词：
HEAT-TRANSFER COEFFICIENTS; SURFACE CRACK FORMATION; FLOW-BASED ANALYSIS; NUMERICAL-SIMULATION; START-UP; TEMPERATURE;
D O I：
10.1007/s11663-009-9254-y
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Secondary cooling information is critical when modeling the direct-chill (DC) casting process of magnesium alloys. However, accurate data for the heat flux in the secondary cooling zone are scarce, and most reported research is concerned with the DC casting of aluminum alloys. Cooling experiments that simulated the secondary cooling of magnesium AZ31 were conducted in order to observe the influence of various parameters on the different boiling-water heat-transfer phenomena. The heat flux in each boiling regime was quantified as a function of the cooling-water flow rate, water temperature, and initial sample temperature. Equations developed from the cooling experiments could be combined to build "idealized" boiling curves for a given set of DC casting conditions.
引用
收藏
页码：585 / 595
页数：11
相关论文
共 50 条
  • [31] Solidification of AZ31 magnesium alloy plate in a horizontal continuous casting process
    You, BS
    Yim, CD
    Kim, SH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 413 : 139 - 143
  • [32] Microstructure control during twin roll casting of an AZ31 magnesium alloy
    Huang, Y.
    Bayandorian, I.
    Fan, Z.
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN SOLIDIFICATION PROCESSES, 2012, 27
  • [33] Properties of AZ31 magnesium alloy sheet produced by twin roll casting
    Nakaura, Y
    Ohori, K
    MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS, 2005, 488-489 : 419 - 425
  • [34] Evaluation of fatigue life of AZ31 magnesium alloy fabricated by squeeze casting
    Horynova, Miroslava
    Zapletal, Josef
    Dolezal, Pavel
    Gejdos, Pavel
    MATERIALS & DESIGN, 2013, 45 : 253 - 264
  • [35] Effect of electromagnetic casting process on microstructure and properties of AZ31 magnesium alloy
    Wang, Qiwei
    Li, Dan
    Chen, Dexin
    Wang, Xiaoming
    Chang, Qing
    Han, Guofeng
    Zhu, Yunlei
    Zhu, Sheng
    Li, Wei
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2019, 32 (5-6) : 304 - 314
  • [36] Evaluation of corrosion resistance of casting magnesium alloy AZ31 in NaCl solutions
    Przondziono, J.
    Walke, W.
    Szala, J.
    Hadasik, E.
    Wieczorek, J.
    TECHNOLOGIES AND PROPERTIES OF MODERN UTILISED MATERIALS, 2011, 22
  • [37] Transient coupling simulation of multi-physical field during pulse electromagnetic direct-chill casting of AZ80 magnesium alloy
    Jia, Yonghui
    Wang, Hang
    Le, Qichi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 143
  • [38] Understanding the influence of ultrasonic streaming on solidification of AZ80 magnesium alloy during direct-chill casting using a transient coupling modeling
    Chen, Xingrui
    Jia, Yonghui
    Le, Qichi
    Yu, Fuxiao
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 14 (14): : 1154 - 1166
  • [39] Macrosegregation modeling during direct-chill casting of aluminum alloy 7050
    Fezi, Kyle
    Plotkowski, Alex
    Krane, Matthew John M.
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2016, 70 (09) : 939 - 963
  • [40] PRIMARY COOLING HEAT TRANSFER DURING THE DIRECT-CHILL CASTING OF ALUMINUM ALLOY AA6111
    Caron, Etienne
    Baserinia, Amir
    Pelayo, Rosa O.
    Weckman, David C.
    Wells, Mary A.
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 1483 - 1492
12345