The properties of plastering mixes in the laboratory and in practice

被引:0
|
作者
Gecks, W
Metzemacher, H
Schmidt, SO
机构
来源
ZKG INTERNATIONAL | 1996年 / 49卷 / 09期
关键词
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In a composite masonry-mortar system the compressive strength is correctly regarded as a critical parameter for assessing the compatibility of the building materials. As a rule the characteristic values of tensile strength and deformation behaviour, which are needed for estimating cracking, correlate well with the compressive strength. However until now the compressive strength of plasters has, for various reasons, been measured under conditions which deviate from those found in practice. It was established in a few quite early trials that these practical conditions led to compressive strengths which were different from those obtained in the laboratory. As part of a wide ranging investigation the compressive strengths and other characteristic mortar values were measured in the laboratory and under practical conditions. The plasters were mixed at the building site with 2 mixer pumps, processed under varying weather conditions, and applied to masonry made of the 4 types of masonry unit normally used in Germany. Investigations when producing the mortar showed that, contrary to the assumptions which have often been expressed, fresh mortar mixed in the laboratory mixer as specified in, the standard does not always have more air voids than mortar mixed on site with mixer pumps. The type of masonry involved was found to have no clear influence on the compressive strength of the layers of plaster which hardened on the different types of masonry. However, it was apparent that the weather conditions during the production and hardening of the plaster had a significant influence on the strength development. Of the methods used for testing compressive strength the partial area load method proved more suitable than testing the surface hardness with the Schmitt hammer The trials confirmed that even with large free contraction movements there were no harmful cracks in plastering mixes where the strengths had been adapted specifically to suit the surface to be plastered.
引用
收藏
页码:482 / 493
页数:12
相关论文
共 50 条
  • [31] Effect of Fly Ash on Properties of Mixed Aggregate Plastering Mortar
    Sun, Guoning
    Huang, Yong
    INTEGRATED FERROELECTRICS, 2021, 219 (01) : 134 - 144
  • [32] Effect of Air Entraining Agent on Properties of Lightweight Plastering Gypsum Mortar
    Liu J.
    Zhang Y.
    Jianzhu Cailiao Xuebao/Journal of Building Materials, 2024, 27 (03): : 259 - 266
  • [33] INFLUENCE OF POPLAR ASH AND WILLOW ASH ADMIXTURE ON PLASTERING MORTAR PROPERTIES
    Volceanov, Adrian
    Volceanov, Eniko
    Marculescu, Cosmin
    REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 2019, 49 (04): : 591 - 600
  • [34] Physical properties of mixes to mangaba sherbet
    de Oliveira, AL
    da Silva, MGF
    Sobral, PJA
    de Oliveira, CAF
    Habitante, AMQB
    PESQUISA AGROPECUARIA BRASILEIRA, 2005, 40 (06) : 581 - 586
  • [35] Field and laboratory investigation of permeable asphalt mixes on Georgia highways
    Brandon, JM
    Jared, DM
    Wu, PY
    Geary, GM
    BITUMINOUS PAVING MIXTURES 2004, 2004, (1891): : 32 - 39
  • [36] On the properties of mixes of toxin and anatoxin.
    Martin, L
    COMPTES RENDUS DES SEANCES DE LA SOCIETE DE BIOLOGIE ET DE SES FILIALES, 1907, 62 : 178 - 179
  • [37] Laboratory investigation of RAP aggregates for dry lean concrete mixes
    Singh, Surender
    Ransinchung, G. D. R. N.
    Monu, Kumari
    Kumar, Praveen
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 166 : 808 - 816
  • [38] RHEOLOGICAL PROPERTIES OF CEMENT MIXES - REPLY
    DAIMON, M
    ROY, DM
    CEMENT AND CONCRETE RESEARCH, 1979, 9 (06) : 797 - 797
  • [39] Laboratory investigation of aged HDPE-modified asphalt mixes
    Ibrahim A.-H.A.
    International Journal of Pavement Research and Technology, 2019, 12 (04) : 364 - 369
  • [40] Frictional properties of asphalt concrete mixes
    Ongel, A.
    Lu, Q.
    Harvey, J.
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-TRANSPORT, 2009, 162 (01) : 19 - 26