Film cooling from a cylindrical hole with parallel auxiliary holes influences

被引：8
|
作者：
Dai, Sheng-ji [1 ]
Xiao, Yang [1 ]
He, Li-ming [1 ]
Jin, Tao [1 ]
Zhao, Zi-chen [1 ]
机构：
[1] Air Force Engn Univ, Aeronaut & Astronaut Engn Coll, Xian 710038, Peoples R China
来源：
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS | 2016年 / 69卷 / 05期
基金：
中国国家自然科学基金;
关键词：
DENSITY; PERFORMANCE; ROW;
D O I：
10.1080/10407782.2015.1081023
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In the present paper, numerical analysis has been performed to investigate the film-cooling performance of a cylindrical hole, cylindrical hole with upstream parallel auxiliary holes, cylindrical hole with downstream parallel auxiliary holes, and a cylindrical hole with both upstream and downstream parallel auxiliary holes. Four kinds of film-cooling holes are compared through Reynolds-averaged Navier-Stokes (RANS) analysis for four blowing ratios: 0.5, 1.0, 1.5, and 2.0. The result shows that the auxiliary holes enhance the film-cooling effectiveness. The cylindrical hole with upstream auxiliary holes is better for protecting the text surface than the cylindrical hole with downstream auxiliary holes. In general, the hole with both upstream and downstream parallel auxiliary holes shows the most effective film protection compared with the other three cases tested in this work, especially in blow ratios 0.5 and 1.0.
引用
收藏
页码：497 / 511
页数：15
相关论文
共 50 条
  • [41] Film Cooling From a Row of Holes Supplemented With Antivortex Holes
    Dhungel, Alok
    Lu, Yiping
    Phillips, Wynn
    Ekkad, Srinath V.
    Heidmann, James
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2009, 131 (02):
  • [42] Numerical Investigation of Scoop Effect on Film Cooling for Cylindrical Inclined Hole
    Ji, Yongbin
    Singh, Prashant
    Ekkad, Srinath V.
    Zang, Shusheng
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017 VOL 8, 2018,
  • [43] A MODEL FOR CYLINDRICAL HOLE FILM COOLING: PART I - A CORRELATION FOR JET-FLOW WITH APPLICATION TO FILM COOLING
    Kampe, Tilman Auf Dem
    Voelker, Stefan
    Zehe, Frank
    PROCEEDINGS OF THE ASME TURBO EXPO 2010, VOL 4, PTS A AND B, 2010, : 1541 - 1550
  • [44] Optimization of geometric parameters of cylindrical film cooling hole with contoured craters to enhance film-cooling effectiveness
    L. C. Bai
    C. Zhang
    Z. T. Tong
    P. F. Ju
    Thermophysics and Aeromechanics, 2021, 28 : 835 - 848
  • [45] Optimization of geometric parameters of cylindrical film cooling hole with contoured craters to enhance film-cooling effectiveness
    Bai, L. C.
    Zhang, C.
    Tong, Z. T.
    Ju, P. F.
    THERMOPHYSICS AND AEROMECHANICS, 2021, 28 (06) : 835 - 848
  • [46] Experimental study of HTC for film cooling of parallel-inlet holes
    Yang, Weihua
    Zhang, Jingzhou
    Transactions of Nanjing University of Aeronautics and Astronautics, 2012, 29 (01) : 46 - 53
  • [47] Effects of craters on cooling performance of parallel-vented film holes
    Zhao, Shengyan
    He, Yeguang
    Feng, Guomiao
    Li, Rundong
    Tuijin Jishu/Journal of Propulsion Technology, 2024, 45 (09):
  • [48] Film-Cooling Performance of Cylindrical and Cratered Holes Fed by a Perpendicular Crossflow
    Shi, Y. C.
    Zhang, C.
    Sun, Z.
    He, Y. X.
    JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS, 2023, 96 (02) : 482 - 491
  • [49] Internal wall-jet film cooling with compound angle cylindrical holes
    Shine, S. R.
    Kumar, S. Sunil
    Suresh, B. N.
    ENERGY CONVERSION AND MANAGEMENT, 2013, 68 : 54 - 62
  • [50] Experimental assessment of film cooling performance of short cylindrical holes on a flat surface
    Kuldeep Singh
    B. Premachandran
    M. R. Ravi
    Heat and Mass Transfer, 2016, 52 : 2849 - 2862
12345