Distributed parameter modeling and its application in parallel flow condenser optimization design based on genetic algorithm

被引：0

作者：

Gu, B. ^{[1
]}

Tian, Z. ^{[1
]}

Liu, F. ^{[2
]}

Lu, Y. ^{[2
]}

Sun, X. D. ^{[1
]}

Yang, L. ^{[3
]}

机构：

[1] Shanghai Jiao Tong Univ, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China

[2] New Energy Vehicle Div SAIC, Shanghai 201804, Peoples R China

[3] Shanghai Jiao Tong Univ, Sch Mech Enginnering, Shanghai 200240, Peoples R China

来源：

HVAC&R RESEARCH | 2014年 / 20卷 / 03期

关键词：

TUBE HEAT-EXCHANGER; EXTRUDED ALUMINUM TUBES; MULTIOBJECTIVE OPTIMIZATION; PRESSURE-DROP; MICRO-FINS; PERFORMANCE; SYSTEM; R-12;

D O I：

10.1080/10789669.2014.889986

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A parallel flow (PF) condenser with mini-channels is commonly used as a condenser in automobile air-conditioning systems. A distributed parameter model (DPM) for the PF condenser (4 passes with 15, 6, 4, and 3 tube numbers, hydraulic diameter D-h = 1.7mm) was developed based on classical correlations of heat transfer and flow friction. Experiments were performed to investigate the thermal hydraulic performance of PF condenser. The proposed DPM model was verified by experimental data. The optimal design of the PF condenser based on DPM was carried out with heat transfer and pressure drop taken as two objective functions. Genetic algorithm (GA) was utilized to solve the multi-objective problem. The hydraulic diameter and the tube numbers of each pass were chosen as design parameters. Pareto optimal solutions for the PF condenser were obtained. Analyses of variation in hydraulic diameter and tube numbers of the PF condenser are also presented.

引用

页码：351 / 361

页数：11

共 50 条

[21] Modeling of glubam roof truss, parameter identification and updating based on parallel genetic algorithm
Shi, Da
Marano, Giuseppe Carlo
Demartino, Cristoforo
ENGINEERING STRUCTURES, 2024, 316
[22] Research on parallel distributed clustering algorithm applied to cutting parameter optimization
Wei, Xudong
Sun, Qingzhen
Liu, Xianli
Yue, Caixu
Liang, Steven Y.
Wang, Lihui
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (11-12): : 7895 - 7904
[23] Optical flow optimization using parallel Genetic Algorithm
Zavala-Romero, Olmo
Botella, Guillermo
Meyer-Baese, Anke
Meyer-Baese, Uwe
INDEPENDENT COMPONENT ANALYSES, WAVELETS, NEURAL NETWORKS, BIOSYSTEMS, AND NANOENGINEERING IX, 2011, 8058
[24] The Application of Chaos Genetic Algorithm in the PID Parameter Optimization
Wu, Tiebin
Cheng, Yun
Tan, Jiafan
Zhou, Taoyun
2008 3rd International Conference on Intelligent System and Knowledge Engineering, Vols 1 and 2, 2008, : 230 - 234
[25] Application of genetic algorithm in the optimization of fuzzy controller parameter
Liu, Guangping
Zhang, Hanjie
Harbin Jianzhu Daxue Xuebao/Journal of Harbin University of Civil Engineering and Architecture, 2000, 33 (03): : 78 - 81
[26] A genetic algorithm for combined parameter and tolerance design optimization
Chirdchid, S
Mazouz, AK
IEEE ICIT' 02: 2002 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY, VOLS I AND II, PROCEEDINGS, 2002, : 1223 - 1228
[27] Application of the Genetic Algorithm in MOSFET Modeling and Parameter Extraction
Cao, Yang
Zhang, Wei
Fu, Jun
Liu, Nianhong
Wang, Quan
Liu, Linlin
2018 3RD IEEE INTERNATIONAL CONFERENCE ON INTEGRATED CIRCUITS AND MICROSYSTEMS (ICICM), 2018, : 264 - 267
[28] Parameter optimization of compressor based on genetic algorithm
Zhong, Meipeng
Zheng, Shuiying
Pan, Xiaohong
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2009, 40 (08): : 198 - 202
[29] Genetic algorithm based parameter identification for parallel manipulators
Chen, WJ
Wei, YZ
Qin, YF
Zhao, MY
PROCEEDINGS OF THE 4TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION, VOLS 1-4, 2002, : 1200 - 1204
[30] A parallel computing application of the genetic algorithm for lubrication optimization
Wang, N
TRIBOLOGY LETTERS, 2005, 18 (01) : 105 - 112

← 1 2 3 4 5 →