A novel method of using second-order lamp model to design dimmable fluorescent lamps electronic ballast

被引：0
|
作者：
Cheng, CA [1 ]
Liang, TJ [1 ]
Chuang, CM [1 ]
Chen, JF [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Elect Engn, Power Elect Lab, Tainan 70101, Taiwan
来源：
IECON'01: 27TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-3 | 2001年
关键词：
D O I：
暂无
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
A novel method for designing half-bridge series-parallel resonant inverters suitable for driving various fluorescent lamps with dimming feature is introduced. The analysis of proposed method is specially concerned with the second-order high frequency equivalent model of fluorescent lamps. To ensure zero-voltage-switching, the L6569-driven power stage is set to operate above the resonant frequency. A design example are presented for a 40W fluorescent lamp operating at a 30kHz switching frequency and 110V-rms utility line voltage. Quasi-sinusoidal waveforms are obtained and the crest factor of lamp current is smaller than 1.7, resulting in longer lamp life. Lamps of various powers and brands are tested. All show good performance, verifying the functionality of the proposed procedure.
引用
收藏
页码：1033 / 1037
页数：5
相关论文
共 50 条
  • [21] A Dimmable Electronic Ballast for Wired or Wireless Remote Control of Electrodeless Fluorescent Lamp Group Lighting Systems
    Kim, Hoon
    Ma, Xian-Chao
    Xu, Hai
    Kim, Hee-Jun
    ICEMS 2008: PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1- 8, 2008, : 2108 - +
  • [22] A GENERALIZED DYNAMIC CONDUCTANCE MODEL FOR HIGH INTENSITY DISCHARGE LAMPS AND ITS PROSPECTIVE APPLICATION TO DESIGN DIMMABLE ELECTRONIC BALLAST
    Bakshi, Biswadeep Gupta
    Roy, Biswanath
    LIGHT & ENGINEERING, 2021, 29 (02): : 59 - 71
  • [23] Design and implementation of electronic ballast for fluorescent lamps with low lighting flicker
    Lin, Yang-Sheng
    Cheng, Chun-An
    Chen, Jiann-Fuh
    Liang, Tsorng-Juu
    Liu, Wei-Shih
    IPEMC 2006: CES/IEEE 5TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-3, CONFERENCE PROCEEDINGS, 2006, : 1178 - +
  • [24] Design of MCU-Based Electronic Ballast for Electrodeless Fluorescent Lamp
    Lin, Chang-Hua
    Li, Wei-Hua
    Hung, Min-Hsuan
    Wang, Chien-Ming
    Lee, Liang-Cheng
    PROCEEDINGS OF THE 2014 9TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA), 2014, : 292 - +
  • [25] Design and Analysis of Performance Characteristics of Electronic Ballast Used for Fluorescent Lamp
    Lokesh, J.
    Khemka, Akshat
    Sharma, Poorvi
    ADVANCES IN SYSTEMS, CONTROL AND AUTOMATION, 2018, 442 : 251 - 257
  • [26] An Optimal LCC Design Method for Dimmable Electronic Ballasts of the HID lamp
    Jang, Moksoon
    Lim, Byounglo
    Park, Chongyeun
    2008 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, VOLS 1-5, 2008, : 1146 - +
  • [27] UV Dose Investigation for Imersed Lamp Purifier for Electronic Ballast UV Lamps design
    De Oro, Luis A.
    Melo, Guilherme de A.
    Canesin, Carlos A.
    2014 16TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION (PEMC), 2014, : 893 - 900
  • [28] Using full physical model for fluorescent lamps in ballast engineering
    Zissis, G
    Buso, D
    2003 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-3: CROSSROADS TO INNOVATIONS, 2003, : 537 - 541
  • [29] Novel Design of HID Lamp Electronic Ballast for Automotive Systems
    DU Ye-qiang
    Semiconductor Photonics and Technology, 2007, (04) : 276 - 279
  • [30] Feedforward Regulation Method for Self-Oscillating Electronic Ballast for Fluorescent Lamps
    Lopes, Juliano de P.
    da Silva, Marcelo F.
    Dalla Costa, Marco A.
    Bisogno, Fabio E.
    do Prado, Ricardo N.
    Seidel, Alysson R.
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2012, 59 (04) : 1869 - 1878
12345