Application and Design of 3D-printed Structures in Bubble Column Reactors

被引：6
|
作者：
Hecht, Corinna [1 ]
Gruenewald, Marcus [1 ]
机构：
[1] Ruhr Univ Bochum, Lehrstuhl Fluidverfahrenstech, Univ Str 150, D-44801 Bochum, Germany
来源：
CHEMIE INGENIEUR TECHNIK | 2019年 / 91卷 / 09期
关键词：
Additive manufacturing; Bubble columns; Periodic open cellular structures; Structuring;
D O I：
10.1002/cite.201800012
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
A new method is described, in which 3D-printed structures are implemented in bubble column reactors to dissolve the macroscopic and the microscopic influences. The effect of these structuring method on the fluid dynamic behavior, the gas distribution, mass transfer, and fluid velocity inside bubble columns is shown in this contribution.
引用
收藏
页码：1273 / 1280
页数：8
相关论文
共 50 条
  • [41] Demonstration and Charaterization of Fully 3D-printed RF Structures
    Mariotti, Chiara
    Tentzeris, Manos M.
    Roselli, Luca
    2015 IEEE 15th Mediterranean Microwave Symposium (MMS), 2015,
  • [42] Gyroid structures for 3D-printed heterogeneous radiotherapy phantoms
    Tino, R.
    Leary, M.
    Yeo, A.
    Brandt, M.
    Kron, T.
    PHYSICS IN MEDICINE AND BIOLOGY, 2019, 64 (21):
  • [43] Optimized Internal Structures for 3D-Printed Sandwich Elements
    Kwon, Hyunchul
    Dillenburger, Benjamin
    IASS 60TH ANNIVERSARY SYMPOSIUM (IASS SYMPOSIUM 2019) - 9TH INTERNATIONAL CONFERENCE ON TEXTILE COMPOSITES AND INFLATABLE STRUCTURES (STRUCTURAL MEMBRANES 2019), 2019, : 1278 - 1285
  • [44] Computational flow modelling and design of bubble column reactors
    Joshi, JB
    CHEMICAL ENGINEERING SCIENCE, 2001, 56 (21-22) : 5893 - 5933
  • [45] Excitability Modulation of Oscillating Media in 3D-Printed Structures
    King, Philip H.
    Abraham, Chinnu H.
    Zauner, Klaus-Peter
    de Planque, Maurits R. R.
    ARTIFICIAL LIFE, 2015, 21 (02) : 225 - 233
  • [46] EXPERIMENTAL INVESTIGATION AND SIMULATION OF 3D-PRINTED LATTICE STRUCTURES
    Heiml, Eva
    Kalteis, Anna
    Major, Zoltan
    17TH YOUTH SYMPOSIUM ON EXPERIMENTAL SOLID MECHANICS (YSESM 2019), 2019, 25 : 52 - 57
  • [47] 3D-printed cellular structures for bone biomimetic implants
    Limmahakhun, Sakkadech
    Oloyede, Adekunle
    Sitthiseripratip, Kriskrai
    Xiao, Yin
    Yan, Cheng
    ADDITIVE MANUFACTURING, 2017, 15 : 93 - 101
  • [48] Predicting optimal geometries of 3D-printed solid oxide electrochemical reactors
    Jang, I.
    Alexander, J. C.
    Farandos, N. M.
    Kelsall, G. H.
    ELECTROCHIMICA ACTA, 2022, 427
  • [49] Design and evaluation of 3D-printed auxetic structures coated by CWPU/graphene as strain sensor
    Choi, Hyeong Yeol
    Shin, Eun Joo
    Lee, Sun Hee
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [50] Metal 3D-printed wick structures for heat pipe application: Capillary performance analysis
    Jafari, Davoud
    Wits, Wessel W.
    Geurts, Bernard J.
    APPLIED THERMAL ENGINEERING, 2018, 143 : 403 - 414
12345