Mg-based amorphous alloys with extended supercooled liquid region produced by mechanical alloying

被引：0
|
作者：
Seidel, M
Eckert, J
ZuecoRodrigo, E
Schultz, L
机构：
来源：
JOURNAL OF NON-CRYSTALLINE SOLIDS | 1996年 / 207卷
关键词：
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Mg-Y-TM (TM = Cu, Ni) amorphous alloys have been prepared by mechanical alloying exhibiting an extended supercooled liquid region before crystallization. The powders were investigated by X-ray diffraction and differential scanning calorimetry (DSC). The thermal stability of these materials, their crystallization kinetics and their grain growth were investigated by means of DSC heated at 40 K/min and isothermal annealing. The results indicate that the crystallization behavior of the mechanically alloyed powders is nearly identical with that of rapidly quenched samples.
引用
收藏
页码：514 / 517
页数：4
相关论文
共 50 条
  • [31] Numerical analysis of micro-formability of Mg-based bulk metallic glass in supercooled liquid region
    Cheng, Ming
    Zhang, Shihong
    COMPUTATIONAL MATERIALS SCIENCE, 2007, 39 (03) : 718 - 722
  • [32] Preparation of new Ni-based amorphous alloys with a large supercooled liquid region
    Akatsuka, R
    Zhang, T
    Koshiba, H
    Inoue, A
    MATERIALS TRANSACTIONS JIM, 1999, 40 (03): : 258 - 261
  • [33] Stability and magnetic properties of Fe-based amorphous alloys with supercooled liquid region
    Grahl, H
    Roth, S
    Eckert, J
    Schultz, L
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2003, 254 : 23 - 25
  • [34] Cu-based bulk amorphous alloys prepared by consolidation of amorphous powders in the supercooled liquid region
    Kim, HJ
    Lee, JK
    Shin, SY
    Jeong, HG
    Kim, DH
    Bae, JC
    INTERMETALLICS, 2004, 12 (10-11) : 1109 - 1113
  • [35] Formation of Cu-Zr-Ni amorphous powders with significant supercooled liquid region by mechanical alloying technique
    Hu, CJ
    Lee, PY
    MATERIALS CHEMISTRY AND PHYSICS, 2002, 74 (01) : 13 - 18
  • [36] Bulk amorphous Co-Ni-based alloys with a large supercooled liquid region
    Wang, XM
    Yoshii, I
    Inoue, A
    MATERIALS TRANSACTIONS JIM, 2000, 41 (04): : 539 - 542
  • [37] Fe-based soft magnetic amorphous alloys with a wide supercooled liquid region
    Koshiba, H
    Inoue, A
    Makino, A
    JOURNAL OF APPLIED PHYSICS, 1999, 85 (08) : 5136 - 5138
  • [38] Current progresses in bulk Mg-based amorphous alloys and their composites
    College of Material Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
    Cailiao Gongcheng, 2008, 11 (75-79):
  • [39] Synthesis of Mg-Cu-Ti based amorphous alloys by mechanical alloying technique
    Hu, C. J.
    Wu, H. M.
    Chen, T. Y.
    13TH INTERNATIONAL CONFERENCE ON RAPIDLY QUENCHED AND METASTABLE MATERIALS, 2009, 144
  • [40] Mg based alloys obtained by mechanical alloying
    Ordoñez, S
    García, G
    Serafini, D
    San Martín, A
    ADVANCED POWDER TECHNOLOGY, 1999, 299-3 : 478 - 485
12345