Tribotechnical Characteristics of Ti6Al4V Titanium Alloy-Ultra-High-Molecular-Weight Polyethylene Friction Pairs

被引：2

作者：

Feldshtein, E. E. ^{[1
]}

Vitjaz, P. A. ^{[2
]}

Leksycki, K. ^{[1
]}

机构：

[1] Univ Zielona Gora, PL-65516 Zielona Gora, Poland

[2] Presidium Natl Acad Sci Belarus, Minsk 220072, BELARUS

来源：

JOURNAL OF FRICTION AND WEAR | 2020年 / 41卷 / 05期

关键词：

Ti6Al4V titanium alloy; UHMWPE; friction; wear; surface topography; physiological lubricants; STAINLESS-STEEL; WEAR BEHAVIOR; UHMWPE;

D O I：

10.3103/S1068366620050098

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Tribotechnical characteristics of Ti6Al4V titanium alloy-ultra-high-molecular-weight polyethylene (UHMWPE) under high loads have been investigated depending on friction conditions. Friction pairs consisting of blocks made of polyethylene with constant machined surface parameters used as the samples and rollers made of titanium alloy having different surface roughness used as the rollers have been studied under dry processing or under processing with emulsion under cooling. Distilled water and counter-bodies Simulated Body Fluid (SBF)) have been used as lubricants. Based on the results of the measurement performed for momentary friction coefficients, friction temperature, and wear rate, as well as on the analysis of worn surface topography for blocks and rollers, it has been found that the best tribotechnical characteristics can be achieved using rollers with a high surface roughness and SBF as the lubricant.

引用

页码：399 / 404

页数：6

共 50 条

[41] Resistance element welding of 7075 aluminum alloy to Ti6Al4V titanium alloy
Wang, Shuai
Li, Yang
Yang, Yue
Manladan, Sunusi Marwana
Luo, Zhen
JOURNAL OF MANUFACTURING PROCESSES, 2021, 70 : 300 - 306
[42] BURR FORMATION AND SURFACE QUALITY IN HIGH SPEED MICROMILLING OF TITANIUM ALLOY (TI6Al4V)
Bajpai, Vivek
Kushwaha, Ajay K.
Singh, Ramesh K.
PROCEEDINGS OF THE ASME 8TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2013, VOL 2, 2013,
[43] Influence of average cutting thickness on high performance milling of titanium alloy Ti6Al4V
Shen, Z.
Liu, G.
Chen, M.
CURRENT DEVELOPMENT IN ABRASIVE TECHNOLOGY, PROCEEDINGS, 2006, : 470 - +
[44] The Effect of Rotary Friction Welding Conditions on the Microstructure and Mechanical Properties of Ti6Al4V Titanium Alloy Welds
Gavalec, Matus
Barenyi, Igor
Krbata, Michal
Kohutiar, Marcel
Balos, Sebastian
Pecanac, Milan
MATERIALS, 2023, 16 (19)
[45] Lap joining of Ti6Al4V titanium alloy by vortex flow-based friction stir welding
Li, Wentao
Zhang, Tairui
Liu, Xiaochao
Cheng, Minghang
Pei, Xianjun
Wang, Xincheng
Zhang, Ping
Sun, Wenwen
Wu, Yong
Shen, Zhikang
Ma, Xin
Ni, Zhonghua
MATERIALS CHARACTERIZATION, 2024, 218
[46] FEM based prediction of phase transformations during Friction Stir Welding of Ti6Al4V titanium alloy
Buffa, Gianluca
Ducato, Antonino
Fratini, Livan
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 581 : 56 - 65
[47] Abrasive machining of Ti6Al4V alloy
Lattner, Radek
Holešovskỳ, František
Karel, Tomáš
Lattner, Michal
Manufacturing Technology, 2015, 15 (04): : 571 - 575
[48] Thermal cycling In (α+β) Ti6Al4V alloy
M. N. Mungole
Rahul Kanojiya
Rakesh Sharma
Bijayani Panda
Transactions of the Indian Institute of Metals, 2008, 61 : 93 - 97
[49] Thermal Cycling In (α+β) Ti6Al4V Alloy
Mungole, M. N.
Kanojiya, Rahul
Sharma, Rakesh
Panda, Bijayani
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2008, 61 (2-3) : 93 - 97
[50] Hydrogenation Behavior of Ti6Al4V Alloy
Yuan Baoguo
Wang Yujie
Zheng Yubin
Gong Longqing
RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (06) : 1486 - 1490

← 1 2 3 4 5 →