Modelling strength and ductility of ultrafine grained BCC and FCC alloys using irreversible thermodynamics

被引：77

作者：

Huang, M. ^{[1
]}

Rivera-Diaz-del-Castillo, P. E. J. ^{[1
]}

Bouaziz, O. ^{[2
]}

van der Zwaag, S. ^{[1
]}

机构：

[1] Delft Univ Technol, Fac Aerosp Engn, NL-2629 HS Delft, Netherlands

[2] ArcelorMittal Res, F-57283 Maizieres Les Metz, France

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2009年 / 25卷 / 07期

关键词：

Thermodynamics; Ductility; Strength; Ultrafine grained alloys; Work hardening modelling; LOW-CARBON STEEL; C-MN STEEL; MECHANICAL-PROPERTIES; PLASTIC-DEFORMATION; NONEQUILIBRIUM THERMODYNAMICS; TENSILE PROPERTIES; WARM DEFORMATION; IF STEEL; METALS; MICROSTRUCTURE;

D O I：

10.1179/174328408X353750

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A novel grain size dependent strain hardening model is derived from the theory of irreversible thermodynamics. The model yields the evolution of the dislocation densities in the grain interior and at the grain boundary, as well as their contributions to the flow stress. It is found that submicron grain sizes have a lower dislocation density in the grain interior, causing ductility to decrease greatly. The predicted stress-strain curve shapes, uniform elongation and ultimate tensile strength values for interstitial free steels (body centred cubic) and aluminium alloys (AA1100, face centred cubic) show good agreement with experimental observations.

引用

页码：833 / 839

页数：7

共 50 条

[41] Achieving synergy of high strength and ductility in ultrafine-grained aluminium through annealing and cryorolling
Sadykov, D. I.
Orlova, T. S.
Lihachev, A. I.
Kirilenko, D. A.
MATERIALS LETTERS, 2025, 382
[42] High tensile ductility and high strength in ultrafine-grained low-carbon steel
Wang, T. S.
Li, Z.
Zhang, B.
Zhang, X. J.
Deng, J. M.
Zhang, F. C.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (10-11): : 2798 - 2801
[43] Additive manufacturing of ultrafine-grained high-strength titanium alloys
Duyao Zhang
Dong Qiu
Mark A. Gibson
Yufeng Zheng
Hamish L. Fraser
David H. StJohn
Mark A. Easton
Nature, 2019, 576 : 91 - 95
[44] Precipitates studies in ultrafine-grained Al alloys with enhanced strength and conductivity
Sitdikov, V. D.
Murashkin, M. Yu.
Valiev, R. Z.
7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 2017, 194
[45] Additive manufacturing of ultrafine-grained high-strength titanium alloys
Zhang, Duyao
Qiu, Dong
Gibson, Mark A.
Zheng, Yufeng
Fraser, Hamish L.
StJohn, David H.
Easton, Mark A.
NATURE, 2019, 576 (7785) : 91 - +
[46] Enhancement of the strain hardening ability in ultrafine grained Mg alloys with high strength
Kim, W. J.
Hong, S. I.
Kim, Y. H.
SCRIPTA MATERIALIA, 2012, 67 (7-8) : 689 - 692
[47] Optimizing the fatigue strength of ultrafine-grained Cu-Zn alloys
Zhang, Z. J.
Pang, J. C.
Zhang, Z. F.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 666 : 305 - 313
[48] Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle
Hu, T.
Ma, K.
Topping, T. D.
Saller, B.
Yousefiani, A.
Schoenung, J. M.
Lavernia, E. J.
SCRIPTA MATERIALIA, 2014, 78-79 : 25 - 28
[49] Synergistic grain boundary engineering for achieving strength-ductility balance in ultrafine-grained high-Cr-bearing multicomponent alloys
Liu, Xiaoming
Song, Kaikai
Kou, Zongde
Gong, Jianhong
Chen, Xiangyan
Gao, Qingwei
Sun, Hui
Liu, Pingping
Qu, Ruitao
Hu, Lina
Zhang, Zequn
Ramasamy, Parthiban
Liu, Zengqian
Zhang, Zhenjun
Liu, Feng
Zhang, Zhefeng
Eckert, Juergen
INTERNATIONAL JOURNAL OF PLASTICITY, 2024, 177
[50] High-strength bimodal ultrafine Ti-based alloys with enhanced ductility
Cao, G. H.
Zhou, Y. N.
Liu, N.
Li, X.
Russell, A. M.
Gerthsen, D.
CRYSTAL RESEARCH AND TECHNOLOGY, 2014, 49 (05): : 338 - 344

← 1 2 3 4 5 →