The influence of interfacial bonding on the response of lightweight aluminium and glass fibre metal laminate panels subjected to air-blast loading

被引：5

作者：

Langdon, Genevieve S. ^{[1
]}

von Klemperer, C. J. ^{[2
]}

Volschenk, G. F. ^{[1
]}

van Tonder, T. ^{[1
]}

Govender, R. A. ^{[1
]}

机构：

[1] Univ Cape Town, Dept Mech Engn, BISRU, Cape Town, South Africa

[2] Univ Cape Town, Dept Mech Engn, Cape Town, South Africa

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2018年 / 232卷 / 08期

基金：

新加坡国家研究基金会;

关键词：

Blast loading; fibre metal laminates; deformation; failure; COMPOSITES; BEHAVIOR; FAILURE; PLATES;

D O I：

10.1177/0954406217718859

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper examines the effects of glass fibre configuration and epoxy resin type on the response of glass fibre epoxy-based fibre metal laminate panels. These lightweight materials are excellent candidates for use in transportation applications, where mass is a major factor in design and materials selection. Interfacial bond strength was characterised through single leg bend testing and revealed varying failure characteristics for different epoxy configurations and surface treatments. A combination of bead blasting and silane treatment provided the best surface treatment for the aluminium, while SE84 epoxy resin gave superior adhesion properties compared to Prime 20ULV. Blast tests were performed to investigate the effect of bond strength on panel response under localised and more uniformly distributed air-blast loading conditions. Dimensionless analysis and failure mode identification were used to show that both fibre configuration and bond strength played a role in blast response but the bond strength (and particularly resin type) was more prominent.

引用

页码：1402 / 1417

页数：16

共 24 条

[21] DYNAMIC RESPONSE OF METALLIC Y-FRAME CORE SANDWICH PANELS SUBJECTED TO AIR BLAST LOADING: NUMERICAL INVESTIGATION
Liu, Ting
Cheng, Yuansheng
Liu, Jun
Chen, Ganchao
Chen, Changhai
Zhang, Pan
PROCEEDINGS OF THE ASME 38TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2019, VOL 3, 2019,
[22] Scaling the response of circular plates subjected to large and close-range spherical explosions. Part I: Air-blast loading
Neuberger, A.
Peles, S.
Rittel, D.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2007, 34 (05) : 859 - 873
[23] Dynamic response of sandwich panels with multi-layered aluminum foam/Check for UHMWPE laminate cores under air blast loading
Cai, Sipei
Liu, Jun
Zhang, Pan
Li, Chunpeng
Cheng, Yuansheng
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2020, 138
[24] The Influence of Spraying Strategy on the Dynamic Response of Polyurea-Coated Metal Plates to Localized Air Blast Loading: Experimental Investigations
Li, Yongqing
Chen, Changhai
Hou, Hailiang
Cheng, Yuansheng
Gao, Haopeng
Zhang, Pan
Liu, Ting
POLYMERS, 2019, 11 (11)

← 1 2 3 →