Internal strain measurement and cure monitoring of 3D angle interlock woven carbon fibre composites

被引：13
|
作者：
Archer, E. [1 ]
Broderick, J. [1 ]
McIlhagger, A. T. [1 ]
机构：
[1] Univ Ulster, Engn Composites Res Ctr, Jordanstown, North Ireland
来源：
COMPOSITES PART B-ENGINEERING | 2014年 / 56卷
关键词：
3-Dimensional reinforcement; Rheological properties; Cure; EMBEDDED FBG; EPOXY-RESIN; SENSOR; DAMAGE; SHRINKAGE; FAILURE; PROFILE; CFRP;
D O I：
10.1016/j.compositesb.2013.08.067
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study presents a methodology to accurately embed EFPI (Extrinsic Fabry Perot Interferometer) fibre optic sensors within the resin channels of 3D woven composite for the purpose of monitoring strain during tensile tests on a 3D woven composite. Using the same sensors the cure induced strain measurement was developed into a valid in situ cure monitoring technique for an epoxy matrix composite through correlation with rheological based cure strain data. Specific strain events were attributed to the gelation and vitrification phases of the epoxy cure cycle. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：424 / 430
页数：7
相关论文
共 50 条
  • [21] Finite element modeling on fracture toughness of 3D angle-interlock woven carbon/epoxy composites at microstructure level
    Siddique, Amna
    Sun, Baozhong
    Gu, Bohong
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2021, 28 (08) : 849 - 860
  • [22] Compressive behavior of 3-D angle-interlock woven fabric composites at various strain rates
    Sun, BZ
    Gu, BH
    Ding, X
    POLYMER TESTING, 2005, 24 (04) : 447 - 454
  • [23] Experimental Investigation on the Compression Behaviours of 3D Angle-interlock Woven Composites with Carbons Nanotube under High Strain Rates
    Ma, Pibo
    Jiang, Gaoming
    Zhang, Fa
    Chen, Qing
    Miao, Xuhong
    Cong, Honglian
    FIBRES & TEXTILES IN EASTERN EUROPE, 2015, 23 (02) : 44 - 50
  • [24] Tensile properties of multilayer multiaxial interlock 3D woven composites
    Guo R.
    Zhang Y.
    Lv Q.
    Chen L.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (10): : 2409 - 2417
  • [25] Stress and failure analysis of 3D orthogonal interlock woven composites
    Naik, NK
    Azad, SNM
    Prasad, PD
    Thuruthimattam, BJ
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2001, 20 (17) : 1485 - 1523
  • [26] Strain rate effects on tensile failure of 3-D angle-interlock woven carbon fabric
    Hou, Yangqing
    Hu, Hangjun
    Sun, Baozhong
    Gu, Bohong
    MATERIALS & DESIGN, 2013, 46 : 857 - 866
  • [27] Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites
    Li, Dian-sen
    Dang, Ming-guang
    Jiang, Lei
    COMPOSITE STRUCTURES, 2021, 268
  • [28] Transverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic Emission
    Gresil, Matthieu
    Saleh, Mohamed Nasr
    Soutis, Constantinos
    MATERIALS, 2016, 9 (08)
  • [29] Experimental investigation on the low-velocity impact damage of 3D angle-interlock woven composites
    Yu, Lijuan
    Jin, Limin
    Niu, Zhilin
    Sun, Baozhong
    Zheng, Yizhu
    Chen, Jiping
    EMERGING MATERIALS AND MECHANICS APPLICATIONS, 2012, 487 : 793 - +
  • [30] A combined machine learning and numerical approach for evaluating the uncertainty of 3D angle-interlock woven composites
    Tang, Ziheng
    Guo, Licheng
    Zheng, Tao
    Li, Zhixing
    Sun, Ruijian
    Huang, Kai
    COMPOSITE STRUCTURES, 2022, 294
12345