The Pitting Corrosion Behavior of the Austenitic Stainless Steel 308L-316L Welded Joint

被引：7

作者：

He, Jinshan ^{[1
]}

Xu, Shiguang ^{[1
]}

Ti, Wenxin ^{[1
,2
]}

Han, Yaolei ^{[2
]}

Mei, Jinna ^{[2
]}

Wang, Xitao ^{[1
,3
]}

机构：

[1] Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China

[2] Suzhou Nucl Power Res Inst, Suzhou 215004, Peoples R China

[3] Qilu Univ Technol, Adv Mat Inst, Shandong Prov Key Lab High Strength Lightweight M, Shandong Acad Sci, Jinan 250353, Peoples R China

来源：

METALS | 2020年 / 10卷 / 09期

关键词：

308L-316L welded joint; microstructure; pitting corrosion; residual strain; HEAT-AFFECTED ZONE; GRAIN-BOUNDARY; RESISTANCE; MICROSTRUCTURE; CRACKING; METAL;

D O I：

10.3390/met10091258

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The pitting corrosion resistance of the austenitic stainless steel 308L-316L welded joint was investigated by electrochemical tests. It is found that the weld zone was the most critical for pits to initiate in the welded joint due to relatively instable passive film with few Mo and inhomogeneous passive film induced by multiple (Mn, Al, and Si) oxides and continuous network of 13.94 vol.% delta ferrites. By statistical analysis, 53.8% pits initiated at (Mn, Al, and Si) oxides, 23.0% in austenite, and 23.2% at interface between ferrite and austenite. In addition, heat-affected zone was prone to have pitting corrosion compared with the base metal since residual strain was much higher in the region.

引用

页码：1 / 12

页数：12

共 50 条

[31] Effect of grain size on pitting corrosion of 304L austenitic stainless steel
Aghuy, A. Abbasi
Zakeri, M.
Moayed, M. H.
Mazinani, M.
CORROSION SCIENCE, 2015, 94 : 368 - 376
[32] Measurement of mechanical properties in a 316L stainless steel welded joint
Molak, Rafal M.
Paradowski, Krystian
Brynk, Tomasz
Ciupinski, Lukasz
Pakiela, Zbigniew
Kurzydlowski, Krzysztof J.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (01) : 43 - 47
[33] Enzyme-induced ennoblement of AISI 316L stainless steel: Focus on pitting corrosion behavior
Landoulsi, J.
Dagbert, C.
Richard, C.
Sabot, R.
Jeannin, M.
El Kirat, K.
Pulvin, S.
ELECTROCHIMICA ACTA, 2009, 54 (28) : 7401 - 7406
[34] Characterization of microstructure, chemical composition, and toughness of a multipass welded joint of austenitic stainless steel AISI316L
Tumer, Mustafa
Yilmaz, Ramazan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (9-12): : 2567 - 2579
[35] Characterization of microstructure, chemical composition, and toughness of a multipass welded joint of austenitic stainless steel AISI316L
Tümer, Mustafa
Yılmaz, Ramazan
International Journal of Advanced Manufacturing Technology, 2016, 87 (9-12): : 2567 - 2579
[36] Characterization of microstructure, chemical composition, and toughness of a multipass welded joint of austenitic stainless steel AISI316L
Mustafa Tümer
Ramazan Yılmaz
The International Journal of Advanced Manufacturing Technology, 2016, 87 : 2567 - 2579
[37] Effect of laser shock peening on corrosion resistance of 316L stainless steel laser welded joint
Liu, Dongwei
Shi, Yan
Liu, Jia
Wen, Long
SURFACE & COATINGS TECHNOLOGY, 2019, 378
[38] The Influence of Hypochlorite-Based Disinfectants on the Pitting Corrosion of Welded Joints of 316L Stainless Steel Dairy Reactor
Pierozynski, Boguslaw
Kowalski, Ireneusz M.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2011, 6 (09): : 3913 - 3921
[39] Influence of Oxygen Content in the Protective Gas on Pitting Corrosion Resistance of a 316L Stainless Steel Weld Joint
Maroufkhani, Mohammad
Hakimian, Soroosh
Khodabandeh, Alireza
Radu, Iulian
Hof, Lucas A.
Jahazi, Mohammad
MATERIALS, 2023, 16 (17)
[40] Corrosion conduct of Austenitic stainless steel 316L subjected to surface treatment
Hassan, Kharia Salman
Razooqi, Ahmed Ibrahim
Ridha, Munaf Hashim
SIXTH SCIENTIFIC CONFERENCE RENEWABLE ENERGY AND ITS APPLICATIONS, 2018, 1032

← 1 2 3 4 5 →