Grinding System Reducing the Influence of Thermal Deformation of Workpiece in Cylindrical Grinding

被引：2
|
作者：
Onishi, Takashi [1 ]
Sakakura, Moriaki [2 ]
Sato, Naoki [1 ]
Kodani, Takuya [1 ]
Ohashi, Kazuhito [1 ]
Tsukamoto, Shinya [1 ]
机构：
[1] Okayama Univ, Kita Ku, 3-1-1 Tsusima Naka, Okayama 7008530, Japan
[2] Daido Univ, Nagoya, Aichi 4578530, Japan
来源：
ADVANCES IN ABRASIVE TECHNOLOGY XVI | 2013年 / 797卷
关键词：
Cylindrical grinding; Thermal deformation; Dimensional error; Prediction of thermal deformation; In-process measurement;
D O I：
10.4028/www.scientific.net/AMR.797.609
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In cylindrical grinding, a sizing device is generally used to obtain the required dimension. However, the dimensional error can be caused by the thermal deformation of the workpiece even if grinding machine is controlled with the sizing device. To solve this problem, it is necessary to develop the grinding system that can consider the thermal deformation of the workpiece during grinding process. In this study, an advanced grinding system was developed, which can predict the net stock removal of ground workpiece immediately. The grinding experiment is carried out to verify the developed system.
引用
收藏
页码：609 / +
页数：2
相关论文
共 50 条
  • [1] Phenomenon of the cylindrical grinding grinding forces and the thermal deformation of the ground workpiece
    Onishi T.
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2019, 85 (09): : 769 - 774
  • [2] Development of the intelligent cylindrical grinding system considering the thermal deformation of a workpiece
    Onishi, Takashi
    Sakakura, Moriaki
    Okanoue, Takuo
    Fujiwara, Kohei
    Fujiyama, Yasuhiro
    Ohashi, Kazuhito
    JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2018, 12 (05):
  • [3] Numerical analysis for thermal deformation of workpiece in cylindrical plunge grinding
    Hasegawa, Hiroyuki
    Suritalatu
    Sakakura, Moriaki
    Tsukamoto, Shinya
    Key Engineering Materials, 2009, 389-390 : 114 - 119
  • [4] Numerical analysis for thermal deformation of workpiece in cylindrical plunge grinding
    Hasegawa, Hiroyuki
    Sakakura, Moriaki
    Tsukamoto, Shinya
    ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 114 - +
  • [5] Simulation analysis of temperature distribution and thermal deformation in a workpiece during cylindrical grinding
    Onishi, Takashi
    Sakakura, Moriaki
    Wada, Yohei
    Song, Shonan
    Sato, Naoki
    Ohashi, Kazuhito
    Tsukamoto, Shinya
    PROGRESS OF MACHINING TECHNOLOGY, 2012, : 65 - +
  • [6] STUDY ON THE GEOMETRICAL ACCURACY IN SURFACE GRINDING - THERMAL DEFORMATION OF WORKPIECE IN TRAVERSE GRINDING
    OKUYAMA, S
    NISHIHARA, T
    KAWAMURA, S
    HANASAKI, S
    INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1994, 28 (04): : 305 - 310
  • [7] STUDY OF PRECISION THREAD GRINDING (PREVENTION OF THERMAL DEFORMATION OF WORKPIECE DURING GRINDING)
    OTSUKA, J
    NAKANO, Y
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1976, 16 (04): : 251 - 265
  • [8] Simulation analysis of thermal deformation of a workpiece during cylindrical plunge grinding - Estimating the grinding force from the power consumption of the wheel motor
    Onishi T.
    Sakakura M.
    Wada Y.
    Sato N.
    Ohashi K.
    Tsukamoto S.
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2016, 82 (01): : 70 - 74
  • [9] THERMAL DEFORMATION AND THERMAL-STRESS IN WORKPIECE UNDER SURFACE GRINDING
    KAGIWADA, T
    KANAUCHI, T
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1981, 15 (03): : 195 - 196
  • [10] STUDY ON PRECISION THREAD GRINDING - PREVENTION OF THERMAL DEFORMATION OF WORKPIECE ARISING FROM GRINDING HEAT
    YAMAMOTO, A
    OTSUKA, J
    MATSUZAW.N
    NAKANO, Y
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1974, 17 (109): : 975 - 983
12345