Bond performance between BFRP bars and 3D printed concrete

被引：36
|
作者：
Sun, Xiaoyan [1 ]
Gao, Chao [1 ]
Wang, Hailong [1 ]
机构：
[1] Zhejiang Univ, Coll Civil Engn & Architecture, Hangzhou 310058, Peoples R China
来源：
CONSTRUCTION AND BUILDING MATERIALS | 2021年 / 269卷
基金：
中国国家自然科学基金;
关键词：
Basalt fibre reinforced polymer bar; 3D printed concrete; Bond property; Surface forms of BFRP bars; Failure mode; BASALT-FIBER; MECHANICAL-PROPERTIES; HARDENED PROPERTIES; FRP BARS; CONSTRUCTION; BEHAVIOR; DURABILITY; GEOPOLYMER; COMPOSITE; TENSILE;
D O I：
10.1016/j.conbuildmat.2020.121325
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
To improve the design and construction of three-dimensional (3D) printed concrete structures, the bond performance between basalt fibre reinforced polymer (BFRP) bars and 3D printed concrete were analysed via pull-out tests. It is found that the bond strength of 3D printed specimens was lower than that of mould-cast specimens, while the failure mode of BFRP bar-reinforced printed concrete was similar to that of reinforced common concrete. The bonding of sand-coated BFRP bars to 3D printed concrete was superior to that of smooth bars. The printing direction of concrete also affected bond performance, with the bond strengths of parallel and 45 degrees inclined specimens exceeding that of vertically printed specimens. By identifying defects at printed and bonding interfaces, the bond degradation mechanism was determined. Furthermore, a continuous bond-slip model was established to predict the bonding strength between BFRP bars and printed concrete, which agreed well with the experimental results. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页数：12
相关论文
共 50 条
  • [41] Bond behaviors of BFRP bars in concrete using carbon fiber rib anchorage
    Meng, Fanjun
    Chen, Wanxiang
    Ma, Jianjun
    Xue, Haien
    Xie, Tianxing
    Xu, Zhengyang
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 345
  • [42] Bond durability of BFRP bars embedded in concrete with fly ash in aggressive environments
    Lu, Zhongyu
    Su, Lizhu
    Lai, Jiawei
    Xie, Jianhe
    Yuan, Bing
    COMPOSITE STRUCTURES, 2021, 271
  • [43] 3D PRINTED CONCRETE BRIDGE
    Salet, T. A. M.
    Ahmed, Z. Y.
    Bos, F. P.
    Laagland, H. L. M.
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2018, : 2 - 9
  • [44] Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete
    Wang, Hailong
    Shao, Jianwen
    Zhang, Jing
    Zou, Daoqin
    Sun, Xiaoyan
    Construction and Building Materials, 2022, 316
  • [45] Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete
    Wang, Hailong
    Shao, Jianwen
    Zhang, Jing
    Zou, Daoqin
    Sun, Xiaoyan
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 316
  • [46] Bond durability performance of sand-coated BFRP bars in high-strength fiber reinforced concrete
    Al-Hamrani, Abathar
    Alnahhal, Wael
    COMPOSITE STRUCTURES, 2023, 321
  • [47] Flexural performance of 3D printed concrete structure with lattice infills
    Dey, Dhrutiman
    Van, Vuong Nguyen
    Xuan, H. Nguyen
    Srinivas, Dodda
    Panda, Biranchi
    Tran, Phuong
    DEVELOPMENTS IN THE BUILT ENVIRONMENT, 2023, 16
  • [48] Mechanical Performance of 3D Printed Concrete in Steam Curing Conditions
    Wang, Bolin
    Yao, Xiaofei
    Yang, Min
    Zhang, Runhong
    Huang, Jizhuo
    Wang, Xiangyu
    Dong, Zhejun
    Zhao, Hongyu
    MATERIALS, 2022, 15 (08)
  • [49] An experimental study of thermal performance of 3D printed concrete slabs
    Dey, Dhrutiman
    Panda, Biranchi
    MATERIALS LETTERS, 2023, 330
  • [50] Bond-slip behaviour of textile-reinforcement in 3D printed concrete
    Ramesh, Akilesh
    Rajeev, Pathmanathan
    Sanjayan, Jay
    JOURNAL OF BUILDING ENGINEERING, 2024, 86
12345