Time dependent behavior of FRP-strengthened RC beams subjected to preload: Experimental study and finite element modeling

被引:6
|
作者
Jiang, Shiyong [1 ]
Yao, Weilai [1 ]
Chen, Jin [1 ]
Tao, Shuai [1 ]
机构
[1] Army Logist Univ PLA, Dept Mil Infrastruct Engn, Chongqing 401311, Peoples R China
关键词
Sustained load; Concrete beam; FRP; Stress-lagging; Cracking pattern; FIBER-REINFORCED-POLYMER; LONG-TERM BEHAVIOR; DEBONDING FAILURE; EPOXY ADHESIVE; CONCRETE BEAMS; CREEP; TEMPERATURE; STRESSES;
D O I
10.1016/j.compstruct.2018.05.110
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
This paper deals with the influence of preload and FRP stress-lagging on the time dependent behaviors of strengthened concrete beams. For this purpose, three concrete beams were fabricated: one (B1) strengthened directly without any preload; one (B2) preloaded, fully unloaded and then strengthened; one (B3) preloaded by the same value of force as B2, but strengthened with the preload remaining. Sustained loads were applied to test beams and their deformations and cracking patterns were recorded for comparison. According to the WA results, B1 presented the largest long-term deformation with the most evident crack propagation in load sustained period, followed by B2 and B3. Accordingly, non-linear finite element (FE) analyses were performed. The validity and accuracy of the FE models were demonstrated by comparing theoretical and experimental results. The effect of adhesive creep was also investigated on the basis of the proposed FE approach. It could be concluded that adequate development of cracks before sustaining loads may have positive influence on better controlling the long-term deformations, while higher level of shear stress in bonding interfaces may present negative effects.
引用
收藏
页码:599 / 613
页数:15
相关论文
共 50 条
  • [31] An experimental approach to the influence of partial rebar corrosion and concrete degradation on behavior of FRP-strengthened RC beams
    Abbasi, M.
    Naderpour, H.
    SN APPLIED SCIENCES, 2021, 3 (09):
  • [32] An experimental approach to the influence of partial rebar corrosion and concrete degradation on behavior of FRP-strengthened RC beams
    M. Abbasi
    H. Naderpour
    SN Applied Sciences, 2021, 3
  • [33] FRP U-Wraps for Mitigating Plate-End Debonding in FRP-Strengthened Beams: Finite Element Modeling and Parametric Study
    Al-Saawani, Mohammed A.
    El-Sayed, Ahmed K.
    Al-Negheimish, Abdulaziz I.
    Alhozaimy, Abdulrahman M.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024, 49 (10) : 14001 - 14019
  • [34] Finite Element Modeling of Debonding Failures in FRP-Strengthened Concrete Beams Using Cohesive Zone Model
    Al-Saawani, Mohammed A.
    Al-Negheimish, Abdulaziz, I
    El-Sayed, Ahmed K.
    Alhozaimy, Abdulrahman M.
    POLYMERS, 2022, 14 (09)
  • [35] Experimental study of FRP-strengthened concrete beams with corroded reinforcement
    Yang, Jincheng
    Haghani, Reza
    Blanksvard, Thomas
    Lundgren, Karin
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 301
  • [36] Durability of FRP-strengthened RC beams subjected to 110 months accelerated laboratory and field exposure
    Hao, Zhi-Hao
    Zeng, Jun-Jie
    Chen, Guang-Ming
    Dai, Jian-Guo
    Chen, Jian-Fei
    ENGINEERING STRUCTURES, 2025, 325
  • [37] On the finite element modelling of RC beams shear-strengthened with FRP
    Chen, G. M.
    Chen, J. F.
    Teng, J. G.
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 32 : 13 - 26
  • [38] Finite element modeling of RC connections strengthened with FRP laminates
    Mostofinejad, D.
    Talaeitaba, S. B.
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY TRANSACTION B-ENGINEERING, 2006, 30 (B1): : 21 - 30
  • [39] Finite element modeling methodologies for FRP strengthened RC members
    Park, S
    Aboutaha, R
    COMPUTERS AND CONCRETE, 2005, 2 (05): : 389 - 409
  • [40] Finite element modelling of FRP-strengthened RC beam-column connections with ANSYS
    Shrestha, Rijun
    Smith, Scott T.
    Samali, Bijan
    COMPUTERS AND CONCRETE, 2013, 11 (01): : 1 - 20