Process of thermal destruction of glucose in consequence of sterilization in autoclave in the biopharmaceutical manufacturing

被引:0
|
作者
Musyanovych, VM [1 ]
Bilyi, OI [1 ]
Gudz, NI [1 ]
Zdyrko, AV [1 ]
机构
[1] State Enterprise Lvivdialic, UA-79005 Lviv, Ukraine
来源
ADVANCES IN NUCLEIC ACID AND PROTEIN ANALYSES, MANIPULATION, AND SEQUENCING | 2000年 / 1卷
关键词
glucose solution; absorption spectra; hydroxymethylfurfurol; desoxyhexozone; concentration; pH-measurements; granulometric analysis;
D O I
10.1117/12.380516
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The results of studying the process of glucose' thermal decomposition in consequence of the sterilization in the autoclave and the shelf life are considered. The research of the process was carried out for 5% glucose solution for injections before and after the sterilization in the autoclave by saturated steam at 110 degrees C for 30 minutes by the study of UV absorption spectra, granulometric analysis in the interval 0.2-25.0 mkm and pH measurements. The spectra of the glucose solutions before the sterilization were found to have no absorption bands in the range from 200nm to 400nm After the sterilization two absorption bands with maximal at 229nm and 284nm respectively appeared. After three-month storage only one absorption band with maximum at 284nm remains. In the report the observed spectral effects are explained.
引用
收藏
页码:220 / 222
页数:3
相关论文
共 50 条
  • [21] Evaluation of the Impact of Buffer Management Strategies on Biopharmaceutical Manufacturing Process Mass Intensity
    Gibson, Kevin
    Oliveira, Jorge C.
    Ring, Denis
    PROCESSES, 2023, 11 (08)
  • [22] Evaluation of process simulation as a decisional tool for biopharmaceutical contract development and manufacturing organizations
    Pleitt, Kristina
    Somasundaram, Balaji
    Johnson, Bradley
    Shave, Evan
    Lua, Linda H. L.
    BIOCHEMICAL ENGINEERING JOURNAL, 2019, 150
  • [23] Virus inactivation using an electrically conducting virus filter in biopharmaceutical manufacturing process
    Jin, Hoeun
    Kim, Hyunsik
    Chae, Soryong
    Baek, Youngbin
    NEW BIOTECHNOLOGY, 2024, 84 : 24 - 29
  • [24] Benchmarking biopharmaceutical process development and manufacturing cost contributions to R&D
    Farid, Suzanne S.
    Baron, Max
    Stamatis, Christos
    Nie, Wenhao
    Coffman, Jon
    MABS, 2020, 12 (01)
  • [25] A review of out-of-autoclave prepregs - Material properties, process phenomena, and manufacturing considerations
    Centea, T.
    Grunenfelder, L. K.
    Nutt, S. R.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 70 : 132 - 154
  • [26] A manta-ray-inspired bionic curing mold for autoclave process of composite manufacturing
    Li, Hao
    Lin, Yi
    Wang, Lingyun
    Xu, Qiang
    Ke, Yinglin
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2023, 42 (1-2) : 17 - 25
  • [27] Advanced retorting, microwave assisted thermal sterilization (MATS), and pressure assisted thermal sterilization (PATS) to process meat products
    Barbosa-Canovas, Gustavo V.
    Medina-Meza, Ilce
    Candogan, Kezban
    Bermudez-Aguirre, Daniela
    MEAT SCIENCE, 2014, 98 (03) : 420 - 434
  • [28] Integrated Design of Process Configuration and Scheduling for Hydrogen Peroxide Decontamination in Biopharmaceutical Injectable Manufacturing
    Yabuta, Keisho
    Futamura, Haruka
    Kawasaki, Koji
    Sugiyama, Hirokazu
    30TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, PTS A-C, 2020, 48 : 853 - 858
  • [29] Uncertainty-conscious methodology for process performance assessment in biopharmaceutical drug product manufacturing
    Casola, Gioele
    Sugiyama, Hirokazu
    Siegmund, Christian
    Mattern, Markus
    AICHE JOURNAL, 2018, 64 (04) : 1272 - 1284
  • [30] Simulation of a Continuous Thermal Sterilization process in the presence of solid particles
    Shahsavand, A.
    Nozari, Y.
    Scientia Iranica, 2009, 16 (1 C) : 29 - 40