Improved creep-resistance of austenitic stainless steel for compact gas turbine recuperators

Primary surface recuperators (PSRs) are compact heat-exchangers made from thin-foil type 347 austenitic stainless steel, which boost the efficiency of land-based gas turbine engines. Compact recuperators are also an essential technology for some new microturbines. Solar turbines uses foil folded into a unique corrugated pattern to maximize the primary surface area for efficient heat transfer between hot exhaust gas on one side, and the compressor discharge air on the other side of the foil. Allegheny-Ludlum produces 0.003-0.004 inches thick foil for a range of current turbine engines using PSRs that operate up to 660 degrees C. One goal of this team-effort project is to modify the processing to enable improved creep resistance of such 347 stainless steel foils at 650-700 degrees C. Laboratory-scale processing modification experiments recently have demonstrated that dramatic improvements can be achieved in the creep resistance of such typical 347 stainless steel foils. The modified processing enables fine NbC carbide precipitates to develop during creep at 650-700 degrees C, which provides strength even with a fine grain size. Such improved creep-resistance allows greater flexibility in optimizing the cost-performance relationship as increased demands are placed on the PSR at higher operating temperatures. The next challenges are to better understand the nature of the improved creep resistance in these 347 stainless steel foil, and to achieve similar improvements with scale-up to commercial foil production.