Stress Inhomogeneity in a Ceramic Surface Layer under Action of an External Load. Part 2. Effect of Thermal Loading

被引：12

作者：

Kuzin, V. V. ^{[1
]}

Grigor'ev, S. N. ^{[1
]}

Ermolin, V. N. ^{[1
]}

机构：

[1] FGBOU VPO Moscow State Technol Univ Stankin, Moscow, Russia

来源：

REFRACTORIES AND INDUSTRIAL CERAMICS | 2014年 / 54卷 / 06期

关键词：

ceramic; inhomogeneity; stress-strained state; surface layer; modelling; zirconium dioxide; design;

D O I：

10.1007/s11148-014-9641-z

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Results are provided for a comprehensive study of stress inhomogeneity in a ceramic surface layer based on zirconium dioxide under action of thermal loading. High stress inhomogeneity is revealed in ceramic structural elements. A requirement is noted for considering stress inhomogeneity in describing a wear and failure mechanism, and also in designing objects of this ceramic for prescribed operating conditions.

引用

页码：497 / 501

页数：5

共 50 条

[41] Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 2: Hysteresis effect under cyclic compressive load
Sadeghi, E.
Djilali, N.
Bahrami, M.
JOURNAL OF POWER SOURCES, 2010, 195 (24) : 8104 - 8109
[42] Effect of AlN and TiN Coatings on Thermal and Stress State of Si3N4–TiC Ceramics Surface Layer Under Heat Flow Conditions
V. V. Kuzin
S. N. Grigor’ev
M. Yu. Fedorov
M. A. Volosova
Refractories and Industrial Ceramics, 2022, 63 : 185 - 191
[43] Methods and Findings of Stress-strain State and Strength Analyses of Multilayer Thick-Walled Anisotropic Cylinders under Dynamic Loading (Review). Part 2. Theoretical Methods
Lepikhin, P. P.
Romashchenko, V. A.
STRENGTH OF MATERIALS, 2013, 45 (02) : 144 - 153
[44] Effect of a Third Invariant on the Effective Reaction of Ductile Porous Bodies. Part 2. Loading Surface of Porous Bodies Whose Properties Are Sensitive to a Triaxial Stressed State
Mikhail B. Shtern
Alexander P. Maidanyuk
A. Cocks
Powder Metallurgy and Metal Ceramics, 2002, 41 : 347 - 354
[45] An improved formulation for the assessment of the capacity load of circular rings and cylindrical shells under external pressure. Part 2. A comparative study with design codes prescriptions, experimental results and numerical simulations
Fraldi, M.
Freeman, R.
Slater, S.
Walker, A. C.
Guarracino, F.
THIN-WALLED STRUCTURES, 2011, 49 (09) : 1062 - 1070
[46] Effect of substrate nano-SiO2hybridization on edge stress distribution of two-dimensional horseshoe-shaped interconnect under thermal load
Gu, Wanghang
Chen, Cheng
Chen, Rui
Zhao, Hanwei
Liu, Bing
JAPANESE JOURNAL OF APPLIED PHYSICS, 2020, 59 (11)
[47] THE INFLUENCE OF CAVITATION DAMAGE UPON HIGH-TEMPERATURE CREEP UNDER STATIONARY AND NON-STATIONARY LOADING CONDITIONS .2. TENSILE CREEP AT CONSTANT LOAD AND CONSTANT TRUE STRESS RESP
BOCEK, M
HOFFMANN, M
JOURNAL OF NUCLEAR MATERIALS, 1984, 125 (01) : 7 - 18
[48] APPLICATION OF MODIFIED FATIGUE CURVE FOR EVALUATION OF FATIGUE DAMAGE OF STEELS AT VARIABLE STRESS AMPLITUDES. PART 2. FATIGUE DAMAGE SUMMARIZATION UNDER TWO-STAGE SYMMETRIC CYCLIC LOADING
Tsybanyov, G., V
STRENGTH OF MATERIALS, 2022, 54 (05) : 809 - 818
[49] Application of Modified Fatigue Curve for Evaluation of Fatigue Damage of Steels at Variable Stress Amplitudes. Part 2. Fatigue Damage Summarization Under Two-Stage Symmetric Cyclic Loading
G. V. Tsybanyov
Strength of Materials, 2022, 54 (5) : 809 - 818
[50] Microstructural evolution of a TiO2 mesoporous single layer film under calcination: Effect of stabilization and repeated thermal treatments on the film crystallization and surface area
Dewalque, Jennifer
Cloots, Rudi
Dubreuil, Olivier
Krins, Natacha
Vertruyen, Benedicte
Henrist, Catherine
THIN SOLID FILMS, 2012, 520 (16) : 5272 - 5276

← 1 2 3 4 5 →