Finite Element Analysis of the Drop Test for Plastics Using Tensile Properties at High Strain Rates

被引：0

作者：

Lee, Kyung-Sick ^{[1
]}

Park, Sung-Jin ^{[1
]}

Han, Tae-Kyung ^{[2
]}

机构：

[1] Univ Ulsan, Sch Mech & Automot Engn, Ulsan 680749, South Korea

[2] Busan Info Tech Coll, Sch Automat & Machine, Busan, South Korea

来源：

IFOST: 2007 INTERNATIONAL FORUM ON STRATEGIC TECHNOLOGY | 2007年

关键词：

High Strain Rates; Plastics; Automotive Interior Trims; Drop Test; FEM;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Drop tests were performed for plastics specimen which are used in the automotive interior trims, and the impact force were measured and the cross sections of the tested specimen were observed Finite element analysis for the drop test were performed using both the stress-strain relation at high strain rates and that at low strain role, and the results were compared with the test results. It is known that the results of finite element analysis using the stress-strain relations at high strain rates coincides with tire test results well.

引用

页码：77 / +

页数：3

共 50 条

[41] TENSILE DEFORMATION OF POLYMERS AT HIGH STRAIN RATES
STAUFFER, WJ
BEATTY, CL
BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1975, 20 (03): : 481 - 481
[42] Finite element analysis for transverse carpal ligament tensile strain and carpal arch area
Yao, Yifei
Erdemir, Ahmet
Li, Zong-Ming
JOURNAL OF BIOMECHANICS, 2018, 73 : 210 - 216
[43] Drop Test Analysis of Fuselage Section of R80 Commuter Aircraft by Using Finite Element Method
Anggono, Agus Dwi
Ardianto, Adik Nofa Rochma Wahyu
7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16), 2017, 1831
[44] Analysis of Stress Buffer Effect of Polyimide for Board Level Drop Test by a Finite Element Analysis
Anzai, Nobuhiro
Fujita, Mitsuru
Sakamaki, Kazutoshi
Kariya, Yoshiharu
2013 8TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2013, : 120 - 123
[45] Determination of the Properties of the Rubber Mounted Under the Agricultural Tractor Rollover Protective Structure Cabin Using a Hyperelastic Tensile Test and Finite Element Analysis
Song H.-S.
Kim Y.-Y.
Journal of Biosystems Engineering, 2020, 45 (03) : 188 - 196
[46] Determination of Drop-Test Behavior of a Sample Peach Using Finite Element Method
Kabas, Onder
Vladut, Valentin
INTERNATIONAL JOURNAL OF FOOD PROPERTIES, 2015, 18 (11) : 2584 - 2592
[47] Miniature test Technique for acquiring true Stress-Strain curves for a large range of Strains using a tensile test and Inverse Finite Element method
Hafeez, Farrukh
Desmukh, M. N.
Husain, Asif
Sehgal, D. K.
MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 4204 - +
[48] Study on the board-level drop test of WLCSP with RDL by finite element analysis
Zhai Xinduo
Wang Jun
Guo Hongyan
Zhang Li
2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 539 - +
[49] Experimental strain analysis of the high pressure strain gauge pressure transducer and verification by using a finite element method
Orhan, MH
Dogan, Ç
Kocabas, H
Tepehan, G
MEASUREMENT SCIENCE AND TECHNOLOGY, 2001, 12 (03) : 335 - 344
[50] Finite Element Analysis of Bend Test of Sandwich Structures Using Strain Energy Based Homogenization Method
Ijaz, Hassan
Saleem, Waqas
Zain-ul-Abdein, Muhammad
Mabrouki, Tarek
Rubaiee, Saeed
Bin Mahfouz, Abdullah Salmeen
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017

← 1 2 3 4 5 →