Application of Multizone Model and CFD Method in Ventilation System Design of Soft Sleeper Car

被引：0

作者：

Wang, Gang ^{[1
]}

Hu, Songtao ^{[1
]}

机构：

[1] Qingdao Technol Univ, Qingdao 266033, Peoples R China

来源：

PROCEEDINGS OF THE 8TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATION AND AIR CONDITIONING, VOL 3: BUILDING SIMULATION AND INFORMATION MANAGEMENT | 2014年 / 263卷

关键词：

Ventilation system; Soft sleeper car; Multizone model; CFD method; AIR-FLOW; BUILDINGS;

D O I：

10.1007/978-3-642-39578-9_21

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Airflow in the high-speed soft sleeper car of passenger train is complex. To balance the air volume distribution between different rooms, multizone model combined with Computational fluid dynamics (CFD) method is used to guide the design. Multizone network model of the ventilation system including ducts and rooms is established, and CFD method is used to get necessary data for solution of the model, e.g., determine the flow resistance characteristic in irregular duct components. According to the calculating results, ventilation system is adjusted for several times till air volume distribution meets the design requirement. Then, prototype model of the car is set up, and experimental test is carried out to verify the multizone model and calculating results. It proved that method of this paper can be applied to the design of ventilation system of soft sleeper car and similar places.

引用

页码：197 / 202

页数：6

共 50 条

[21] Energy Management Method for Solar Race Car Design and Application
Ustun, O.
Yilmaz, M.
Gokce, C.
Karakaya, U.
Tuncay, R. N.
2009 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE, VOLS 1-3, 2009, : 798 - +
[22] Application of design for manufacture and assembly (DFMA) method to passenger car door design
Abd Samad, Md Fahmi
George, Kjeldsen Yusuf
PROCEEDINGS OF INNOVATIVE RESEARCH AND INDUSTRIAL DIALOGUE 2018 (IRID'18), 2019, : 144 - 145
[23] Application of integrating multi-zone model with CFD simulation to natural ventilation prediction
Tan, G
Glicksman, LR
ENERGY AND BUILDINGS, 2005, 37 (10) : 1049 - 1057
[24] CFD-based design and analysis of the ventilation of an electric generator model, validated with experiments
Chalmers University of Technology, Göteborg
412 96, Sweden
Int. J. Fluid Mach. Sys., 2 (113-123):
[25] CFD design of ventilation system for large underground bus terminal in Macau Barrier Gate
Zhao, Rui
Zhou, Ling
Ma, Jinsheng
JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 2018, 179 : 1 - 13
[26] Design for Wind Tunnel Testing of Scaled Model by CFD Method
Zhu Hui
Yang Zhigang
APPLIED MECHANICS AND MATERIALS I, PTS 1-3, 2013, 275-277 : 567 - 571
[27] Application of smart control suspension system based on soft computing to a passenger car
Hagiwara, T
Panfilov, SA
Ulyanov, SV
Takahashi, K
Diamante, O
PROCEEDINGS OF ISMA 2002: INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING, VOLS 1-5, 2002, : 87 - 94
[28] An aerodynamic model of complex tunnels for ventilation system design
Nishiuma, Norihiro
Goto, Yukio
Fukushima, Hideki
Mizuno, Akisato
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2002, 68 (675): : 2990 - 2996
[29] Design of Soft Whiteboard System and Its application in Education
Hu, Guotao
Liu, Qingtang
Chen, Mao
Yu, Chao
2009 SECOND INTERNATIONAL SYMPOSIUM ON KNOWLEDGE ACQUISITION AND MODELING: KAM 2009, VOL 2, 2009, : 336 - 338
[30] APPLICATION OF MODERN ROBUST OPTIMAL DESIGN METHOD TO THE SHOCK ABSORBER IN A CAR*
Zhang Ruihong Tan RunhuaSchool of Mechanical Engineering
Chinese Journal of Mechanical Engineering, 2003, (01) : 37 - 39

← 1 2 3 4 5 →