The effect of nozzle shape on bubble formation from a downward nozzle

被引：5

作者：

Tsuge, Hideki ^{[1
]}

Mitsudani, Masae ^{[1
]}

Tezuka, Yusuke ^{[1
]}

机构：

[1] Keio Univ, Grad Sch Sci & Technol, Sch Sci Open & Environm Syst, Kohoku Ku, Yokohama, Kanagawa 2238522, Japan

来源：

CHEMICAL ENGINEERING & TECHNOLOGY | 2006年 / 29卷 / 09期

关键词：

bubbles; modeling; nozzles;

D O I：

10.1002/ceat.200600181

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A lot of research has been conducted on the gas injection methods; especially bubble formation from the upward orifice or nozzle, whereas few studies on bubble formation from the downward nozzle have been reported. In this study, the effects of both nozzle shape and diameter on the bubble formation mechanism from the vertically downward nozzle were investigated. The theoretical results obtained by applying the revised two-stage spherical bubble formation model for the downward nozzle was compared with the experimental results for small metal downward nozzles. The bubble formation mechanism and the bubble size were influenced by the edge angle and diameter of the nozzle, respectively, and the gas flow rate.

引用

页码：1097 / 1101

页数：5

共 50 条

[21] On the transition stage of bubble formation on the orifice of a submerged vertical nozzle
Lee, Shong-Leih
Yang, Chao-Fu
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2012, 90 (03): : 612 - 620
[22] PHOTOGRAPHIC OBSERVATIONS OF BUBBLE FORMATION IN FLASHING NOZZLE-FLOW
MILLER, RS
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1985, 107 (04): : 750 - 755
[23] Frequency of Bubble Formation from a Multi-Hole Nozzle Attached to a Top Lance
Ooyabu, Hirofumi
Hiratsuka, Akira
Tsujino, Ryoji
Iguchi, Manabu
MATERIALS TRANSACTIONS, 2009, 50 (07) : 1812 - 1819
[24] Bubble formation process from a novel nozzle design in liquid cross-flow
Jobehdar, M. H.
Siddiqui, K.
Gadallah, A. H.
Chishty, W. A.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2016, 61 : 599 - 609
[25] Frequency of bubble formation from a multi-hole nozzle attached to a top lance
Graduate School of Engineering, Hokkaido University, Sapporo 060-8628, Japan
不详
不详
Mater. Trans., 7 (1812-1819):
[26] Numerical prediction of bubble formation from top-submerged nozzle in stagnant liquid
Wu, Xuan
Li, Tie
Yuan, Zhulin
Cai, Jie
Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2008, 38 (01): : 86 - 91
[27] Bubble splitting by turbulent jet emitted from nozzle
Department of Applied Chemistry, Faculty of Engineering, Okayama University of Science, Okayama 700-0005, Japan
J. Chem. Eng. Jpn., 5 (704-707):
[28] Bubble splitting by turbulent jet emitted from nozzle
Miyahara, T
Matsunaga, H
Akagi, Y
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1999, 32 (05) : 704 - 707
[29] The effect of added polymers on the formation of drops ejected from a nozzle
Shore, HJ
Harrison, GM
PHYSICS OF FLUIDS, 2005, 17 (03) : 033104 - 1
[30] THE EFFECT OF NOZZLE ELECTRIFICATION ON SPRAY FORMATION FROM AN AIRBLAST ATOMIZER
Heindel, Theodore J.
Bothell, Julie K.
Burtnett, Thomas J.
Li, Danyu
Morgan, Timothy B.
Aliseda, Alberto
Machicoane, Nathanael
Matusik, Katarzyna E.
Kastengren, Alan L.
4TH THERMAL AND FLUIDS ENGINEERING CONFERENCE, ASTFE 2019, 2019,

← 1 2 3 4 5 →