PERFORMANCE ANALYSIS OF DOUBLE-LAYER MICROCHANNEL HEAT SINK WITH VARIOUS MICROCHANNEL SHAPES

被引：18

作者：

Kulkarni, Kishor ^{[1
]}

Khan, Aatif Ali ^{[1
]}

Kim, Kwang-Yong ^{[1
]}

机构：

[1] Inha Univ, Dept Mech Engn, 100 Inha Ro, Incheon 22212, South Korea

来源：

HEAT TRANSFER RESEARCH | 2018年 / 49卷 / 04期

关键词：

microchannel; liquid cooling; conjugate heat transfer; thermal-hydraulic performance; heat sink; thermal resistance; pressure drop; MULTIOBJECTIVE OPTIMIZATION; THERMAL PERFORMANCE; RECTANGULAR MICROCHANNELS; NUMERICAL-SIMULATION; FORCED-CONVECTION; LAMINAR-FLOW; FLUID-FLOW; DUCTS; RIBS;

D O I：

10.1615/HeatTransRes.2018018534

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The thermal hydraulic performance of a double-layer microchannel heat sink was analyzed with a variety of channel shapes using three-dimensional Navier-Stokes equations in a range of Reynolds numbers from 160 to 850. Parallel and counterflow arrangements of double-layer microchannels and seven cross-sectional shapes of microchannels (boot, diamond, hexagonal, pentagonal, rectangular, rectangular wedge, and triangular) were tested in this work. The temperature, Nusselt number, thermal resistance, and pumping power were obtained for each channel shape and arrangement using conjugate heat transfer analysis. Among the tested microchannel shapes, the rectangular wedge shape showed the best thermal performance with the lowest thermal resistance and also with the greatest pumping power. The counterflow arrangement showed better thermal performance with a similar pumping power than the parallel flow arrangement for all the channel shapes.

引用

页码：349 / 367

页数：19

共 50 条

[31] Numerical investigation of a hybrid double layer microchannel heat sink with jet impingement
Mostafa Y.T.
El-Dosoky M.F.
Abdelgawad M.
Hassan O.
International Journal of Thermofluids, 2023, 20
[32] Performance analysis of microchannel heat sink with flow disrupting pins
Gaikwad, V. P.
Mohite, S. S.
JOURNAL OF THERMAL ENGINEERING, 2022, 8 (03): : 402 - 425
[33] COOLING PERFORMANCE OF NANOFLUIDS IN A MICROCHANNEL HEAT SINK
Wang, Y.
Chung, S. J.
Leonard, J. P.
Cho, S. K.
Phuoc, T.
Soong, Y.
Chyu, M. K.
MNHMT2009, VOL 1, 2010, : 617 - 623
[34] Cooling performance of a microchannel heat sink with nanofluids
Jang, Seok Pil
Choi, Stephen U. S.
APPLIED THERMAL ENGINEERING, 2006, 26 (17-18) : 2457 - 2463
[35] Analysis of heat transfer characteristics of double-layered microchannel heat sink
Hung, Tu-Chieh
Yan, Wei-Mon
Li, Wei-Ping
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (11-12) : 3090 - 3099
[36] Heat transfer and thermodynamic analysis by introducing multiple alternation structures into double-layer microchannel heat sinks
Shen, Han
Xie, Gongnan
Wang, Chi-Chuan
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 145
[37] CFD analysis of double-layer microchannel conjugate parallel liquid flows with electric double-layer effects
Ng, EYK
Poh, ST
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2001, 40 (07) : 735 - 749
[38] PERFORMANCE OF CONCENTRATED PHOTOVOLTAIC CELLS USING VARIOUS MICROCHANNEL HEAT SINK DESIGNS
Radwan, Ali
Ahmed, Mahmoud
Ookawara, Shinichi
PROCEEDINGS OF THE ASME 10TH INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY, 2016, VOL 1, 2016,
[39] Investigation of Flow and Heat Transfer Performance of Double-Layer Pin-Fin Manifold Microchannel Heat Sinks
Li, Yantao
Wang, Qianxiang
Li, Minghan
Ma, Xizhen
Xiao, Xiu
Ji, Yulong
WATER, 2022, 14 (19)
[40] Header impact assessment of double-layer microchannel heat sink in the computational fluid mechanics simulation for CPV thermal management
Elqady, Hesham, I
Abo-Zahhad, Essam M.
Ali, Abdallah Y. M.
Elkady, M. F.
El-Shazly, A. H.
Radwan, Ali
ENERGY REPORTS, 2020, 6 : 55 - 60

← 1 2 3 4 5 →