Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature

被引：73
|
作者：
Zhang, Xiaohua [1 ]
Liu, Daoxin [1 ]
机构：
[1] NW Polytech Univ, Corros & Protect Res Lab, Xian 710072, Peoples R China
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2009年 / 31卷 / 05期
基金：
中国国家自然科学基金;
关键词：
Titanium alloy; Fretting fatigue; Shot peening; Elevated temperature; Residual stress; TI-6AL-4V; COATINGS; ENGINE;
D O I：
10.1016/j.ijfatigue.2008.10.004
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effects of compressive residual stress, surface roughness, microstructure hardening induced by shot peening (SP) on the fretting fatigue (FF) resistance of Ti811 titanium alloy at elevated temperature were evaluated. The results show that SP improves the FF resistance of Ti811 alloy at 350 degrees C, but decreases the resistance at 500 degrees C. Compressive residual stress is the predominant factor in improving the FF resistance of the alloy at 350 degrees C. Compressive residual stress induced by SIR arrests crack growth. Microstructure hardening due to SP has a minor effect on FF resistance. Surface roughening induced by SP is detrimental to the FF resistance of the alloy at both 350 and 500 degrees C, as microcracks initiate easily in the roughened surface under these conditions. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：889 / 893
页数：5
相关论文
共 50 条
  • [41] Effects of Carbon-Doped Oxidation with Shot Peening on the Fretting Fatigue Strength of Ti-6Al-4V Alloy
    Yoshida, Atsuki
    Lee, Sang-Hak
    Shiraishi, Tohru
    Ono, Yoshiki
    Maruyama, Norio
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2014, 78 (02) : 75 - 81
  • [42] Effect of shot peening on the fretting wear of Ti-6Al-4V
    Fridrici, V
    Fouvry, S
    Kapsa, P
    WEAR, 2001, 250 : 642 - 649
  • [43] Shot Peening and Solid Lubricating on Ti6 Al4 V Fretting Fatigue
    刘道
    张必
    唐宾
    何家文
    Rare Metals, 1999, (03) : 229 - 234
  • [44] Shot peening ang solid lubricating on Ti6Al4V fretting fatigue
    Liu, DX
    Zhang, BQ
    Tang, B
    He, JW
    RARE METALS, 1999, 18 (03) : 229 - 234
  • [45] Elevated temperature fretting fatigue of Ti-17 with surface treatments
    Gean, M. C.
    Farris, T. N.
    TRIBOLOGY INTERNATIONAL, 2009, 42 (09) : 1340 - 1345
  • [46] Effect of Shot Peening Process on the Fatigue Life of Shot Peened Low Alloy Steel
    Pham Quang Trung
    Khun, Nay Win
    Butler, David Lee
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (01):
  • [47] Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy
    Lindemann, J
    Buque, C
    Appel, F
    ACTA MATERIALIA, 2006, 54 (04) : 1155 - 1164
  • [48] The effect of ultrasonic shot peening on the fatigue life of alloy materials: a review
    Chen Y.
    Deng S.
    Zhu C.
    Hu K.
    Yin F.
    International Journal of Computational Materials Science and Surface Engineering, 2021, 10 (3-4) : 209 - 234
  • [49] Fretting Fatigue-An Integral Simulation Approach to Strengthening by Shot Peening
    Gerken, Patrick
    Richter, Christoph H.
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2021, 143 (10):
  • [50] Shot peening of plasma nitrided steel for fretting fatigue strength enhancement
    Li, CX
    Sun, Y
    Bell, T
    MATERIALS SCIENCE AND TECHNOLOGY, 2000, 16 (09) : 1067 - 1072
12345