Study on tensile properties of composite laminates with gap defects

被引：0
|
作者：
Zhang, X. Z. [1 ]
Bai, R. X. [1 ]
Lei, Z. K. [1 ]
Zhu, Y. G. [1 ]
Geng, C. H. [1 ]
Feng, Y. [1 ]
Zhong, Z. [1 ]
Wu, W. [1 ]
机构：
[1] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China
来源：
2ND INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING (IWMSME2018) | 2019年 / 504卷
基金：
中国国家自然科学基金;
关键词：
D O I：
10.1088/1757-899X/504/1/012079
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The mechanical properties of composite laminates with gap defects are studied both experimentally and numerically. Based on the experimental research, a finite element model of composite laminates with gap defects is established ABAQUS software, Hashin stress failure criterion and Camanho stiffness degradation model is used to analyse the mechanical properties of composite laminates with gap defects under tensile load. By comparing with the results of ideal composite laminates, the influence of the existence of defects on the matrix and fibre damage and interface damage of the laminates is discussed. The feasibility and effectiveness of the finite element method are verified by comparison with experiments. The results show that the existence of gap defects under the tensile load will lead to the stress concentration distribution of laminate and reduce the ultimate strength of the laminate.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] Strain rate effects on dynamic tensile properties of open-hole composite laminates
    Sun, Jin
    Jing, Zhen
    Wu, Jian
    Wang, Weibo
    Zhang, Diantang
    Zhao, Junhua
    COMPOSITES COMMUNICATIONS, 2020, 19 : 226 - 232
  • [22] The effects of high strain-rate and temperature on tensile properties of UHMWPE composite laminates
    Aziz, Alia Ruzanna
    Al Abdouli, Haleimah
    Kakur, Naresh
    Ramos, Henrique
    Savioli, Rafael
    Guan, Zhongwei
    Santiago, Rafael
    COMPOSITES PART C: OPEN ACCESS, 2025, 16
  • [23] Evaluation of the effect of the strain rate on the tensile properties of carbon-epoxy composite laminates
    Kwon, Junbeom
    Choi, Jaeyoung
    Huh, Hoon
    Lee, Jungju
    JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (22) : 3197 - 3210
  • [24] Evaluation of tensile properties of FRP composite laminates under varying strain rates and temperatures
    Joshi, Prahlad Srinivas
    Panigrahi, S. K.
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2022, 16 (61): : 338 - 351
  • [25] Microstructure and tensile properties of carbon-epoxy laminates produced by automated fibre placement: Influence of a caul plate on the effects of gap and overlap embedded defects
    Lan, Marine
    Cartie, Denis
    Davies, Peter
    Baley, Christophe
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 78 : 124 - 134
  • [26] DELAMINATION BUCKLING IN COMPOSITE LAMINATES WITH INTERLAMINAR DEFECTS
    BRUNO, D
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 1988, 9 (02) : 145 - 159
  • [27] COMPRESSIVE STRENGTH OF COMPOSITE LAMINATES WITH INTERLAMINAR DEFECTS
    GILLESPIE, JW
    PIPES, RB
    COMPOSITE STRUCTURES, 1984, 2 (01) : 49 - 69
  • [28] Effect of embedded periodic fiber placement gap defects on the microstructure and bistable behavior of thermoplastic composite laminates
    Ma, Yonglong
    Zhang, Zheng
    Wang, Sheng
    Pan, Baisong
    Sun, Min
    Zhang, Guang
    Chai, Hao
    Wu, Huaping
    Jiang, Shaofei
    POLYMER COMPOSITES, 2023, 44 (12) : 9008 - 9025
  • [29] Study of tensile properties of laminates containing microvascular channels with different diameters
    Ran G.
    Ma Y.
    An Z.
    Zhao D.
    Guo X.
    Cheng X.
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2024, 50 (04): : 1405 - 1415
  • [30] Effect of gap and overlap fiber placement defects on the delamination behavior of L-shaped composite laminates
    Qian, Shimeng
    Liu, Xin
    Ye, Yaoyao
    Xu, Qiang
    Zhang, Ting
    Li, Xiangqian
    COMPOSITE STRUCTURES, 2021, 268
12345