DEVELOPMENT OF INDUCTION SYSTEMS FOR HEATING OF DISKS

被引：1
|
作者：
Mannanov, E. R. [1 ]
Galunin, S. A. [1 ]
Nikanorov, A. N. [2 ]
Nacke, B. [2 ]
Kozulina, T. P. [1 ]
机构：
[1] St Petersburg Electrotech Univ LETI, 5 Prof Popova St, St Petersburg 197376, Russia
[2] Leibniz Univ Hannover, Inst Electrotechnol, Wilhelm Busch Str 4, D-30167 Hannover, Germany
来源：
ST PETERSBURG POLYTECHNIC UNIVERSITY JOURNAL-PHYSICS AND MATHEMATICS | 2019年 / 12卷 / 02期
关键词：
induction heating; electrothermal task; numerical simulation; heat treatment; heating with rotation;
D O I：
10.18721/JPM.12202
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The paper presents the experimental and numerical results obtained by the induction heating a steel disk. This study has been aimed at realizing the local uniform heating the disk at minimum temperature departure from 4513 degrees C. The system-of-interest included 3-turn inducers and a steel disk heated up. The computer-based investigation results were implemented at a laboratory mock-up. The temperature distribution over the disk material and its changes were recorded by a thermal imager. Simulation of electromagnetic and thermal processes occurring in heating a rotating disk-shaped work piece was carried out using ANSYS APDL base. A comparison between the obtained numerical data and experimental one showed a disagreement of about 5 %. It pointed to an adequacy of simulation carried out. A detailed analysis of the disagreement sources was made.
引用
收藏
页码：23 / 31
页数：9
相关论文
共 50 条
  • [41] AUTOMATIC DESIGN OF AXISYMMETRICAL INDUCTION-HEATING SYSTEMS
    GUARNIERI, M
    LUPI, S
    STELLA, A
    IEEE TRANSACTIONS ON MAGNETICS, 1986, 22 (05) : 822 - 824
  • [42] Advanced Simulation of Load Variation in Induction Heating Systems
    Baciu, Ionel H.
    Taut, Adrian
    Pop, Ovidiu
    Lungu, Serban
    2009 32ND INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY, 2009, : 430 - 433
  • [43] Development of curved braces partially strengthened by induction heating
    Liu, Yuan
    Iwata, Kaho
    Sanda, Sayano
    Nishiyama, Minehiro
    Tani, Masanori
    ENGINEERING STRUCTURES, 2021, 233
  • [44] Calculation model for temperature/microstructure development at induction heating
    Beckert, U.
    Lehnert, W.
    Iron and Steelmaker (I and SM), 2000, 27 (12): : 21 - 26
  • [45] Development of PFC Converter for Induction Heating System in Railway
    Hong, Seong-Yong
    Kim, Dong-Kyun
    Oh, Hyeong-Seok
    Lee, Jae-Bum
    Park, Chan-Bae
    Lee, Byung-Song
    Lee, Hyung-Woo
    2022 25TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2022), 2022,
  • [46] On the Development of Magnetic Induction Heating for Hyperthermia and Ablation of Tumors
    Huang, Chi-Fang
    2015 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON RF AND WIRELESS TECHNOLOGIES FOR BIOMEDICAL AND HEALTHCARE APPLICATIONS (IMWS-BIO), 2015, : 9 - 11
  • [47] The Development of High Frequency Induction Heating Embedded Coil
    Huang, Jung-Tang
    Lin, Po-An
    Lin, Po-Chin
    Lee, Kuo-Yu
    Hsu, Hou-Jun
    IMPACT: 2009 4TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE, 2009, : 611 - 614
  • [48] Development of Induction Heating System Ensuring Increased Heating Efficiency of the Charge Material in a Forging
    Hawryluk, Marek
    Rychlik, Marcin
    Pietrzak, Michal
    Gorski, Piotr
    Marzec, Jan
    MATERIALS, 2022, 15 (04)
  • [49] Methods of calculation for induction-resistive pipeline heating systems
    Strupinskiy, Mikhail
    Khrenkov, Nikolay
    Kuvaldin, Alexandr
    PRZEGLAD ELEKTROTECHNICZNY, 2008, 84 (11): : 232 - 235
  • [50] Several Configurations and Resonant Control for Multiphase Induction Heating Systems
    Quoc Dung Phan
    Anh Tuan Vo
    Thang Pham Ngoc
    Maussion, Pascal
    2016 52ND ANNUAL MEETING OF THE IEEE INDUSTRY APPLICATIONS SOCIETY (IAS), 2016,
12345