Optimization of Operation Parameters of a Vertical Sterilizer of Medium-Scale Oil Palm Mill Using Taguchi Method

被引:2
|
作者
Morakinyo, T. Afolabi [1 ]
Bamgboye, A. Isaac [2 ]
机构
[1] Obafemi Awolowo Univ, Dept Food Sci & Technol, Ife, Nigeria
[2] Univ Ibadan, Dept Agr & Environm Engn, Ibadan, Nigeria
关键词
D O I
10.1111/jfpe.12453
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
In this study optimum operation parameters of a newly developed sterilizer of the medium-scale oil palm processing mill were investigated for maximum oil yield. Taguchi's experimental design of orthogonal array L9 ( 34) was adopted to generate nine runs of experiment. Response surface method was used to optimize operation parameters and validated using Taguchi's table. However, experimental result was analyzed to generate predicted-dependent operation parameters through linear multiple regression equations. Hence, coefficients of correlations were established using Karl Persons's formula. The optimum predicted indepenent operation parameters for the sterilizer were Tenera 33.33 years, 128.89 degrees C, 3 bar, 51.11 min for age of Tenera fruits, initial temperature, pressure of superheated steam, and sterilization period, respectively. These optimum values correspond to 6th run on Taguchi's table. The coefficients of correlations between experimental and predicted values were: 0.87, 0.85, 0.99, and 0.54 for equilibrium temperature, equilibrium pressure, oil yield, and efficiency, respectively. Practical ApplicationsThe indigenous technology of oil palm processing in Nigeria has not been developed beyond small-scale method, which is characterized with unscientific techniques and facility. In this small-scale method oil palm fruits are sterilized using unpressurize vessel without instrumentation and control devices for parameters regulation and monitoring. Because of the poor economy in Africa and Nigeria in particular, large-scale mill remain unaffordable. Hence to enhance productivity of oil palm, a vertical sterilizer was developed as one of the unit operations of a synchronized medium-scale oil palm fruit processing mill. In this synchronized mill, fresh oil palm fruits were sterilized using developed sterilizer (pressure vessel) that was coupled with fire-in-tube boiler. For the effective handling of this facility, investigation of the optimum operation parameters of the sterilizer such as: age of Tenera fruits, superheated steam temperature and pressure, likewise sterilization period is essential to enhance oil yield, hence this study.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] Operation parameters multi-objective optimization method of large vertical mill based on CFD-DPM
    Huang, Rongjie
    Ma, Yaoshuai
    Li, Hao
    Sun, Chunya
    Liu, Jun
    Zhang, Shuai
    Wang, Haoqi
    Hao, Bing
    ADVANCED POWDER TECHNOLOGY, 2023, 34 (06)
  • [22] Optimization of process parameters for recycling of mill scale using Taguchi experimental design (vol 24, pg 2127, 2010)
    Baek, Seok-Heum
    Hong, Soon-Hyeok
    Cho, Seok-Swoo
    Jang, Deuk-Yul
    Joo, Won-Sik
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (09) : 4573 - 4573
  • [23] Optimization of lipase production by Candida cylindracea in palm oil mill effluent based medium using statistical experimental design
    Salihu, Aliyu
    Alam, Md Zahangir
    AbdulKarim, M. Ismail
    Salleh, Hamzah M.
    JOURNAL OF MOLECULAR CATALYSIS B-ENZYMATIC, 2011, 69 (1-2) : 66 - 73
  • [24] Palm Oil Mill Effluent (POME) Treatment by Using An Electrocoagulation Method
    Ahmad, Taib Jamilullail
    Zawawi, Daud
    RESEARCH JOURNAL OF CHEMISTRY AND ENVIRONMENT, 2011, 15 (02): : 606 - 609
  • [25] Optimization of vacuum casting process parameters using Taguchi method
    Ahmad, Mohd Nazri
    Alkahari, Mohd Rizal
    Basir, Mohamad Faris Mohd
    Maidin, Nurul Ain
    Wahid, Mohammad Khalid
    Ab Rahman, Mohd Hidayat
    Osman, Mohd Hairizal
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 146 - 147
  • [26] Optimization of parameters effecting food drying using Taguchi method
    Turkan, Burak
    Etemoglu, Akin Burak
    PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2020, 26 (04): : 654 - 665
  • [27] Optimization of manufacturing parameters for a brake lining using Taguchi method
    Kim, SJ
    Kim, KS
    Jang, H
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 136 (1-3) : 202 - 208
  • [28] Enhanced Optimization of Bioethanol Production from Palm Waste Using the Taguchi Method
    Ragab, Tamer I. M.
    Alminderej, Fahad M.
    El-Sayed, Wael A.
    Saleh, Sayed M.
    Shalaby, Al Shimaa Gamal
    SUSTAINABILITY, 2021, 13 (24)
  • [29] Failure detection and optimization of sugar mill boiler using FMEA and Taguchi method
    Mariajayaprakash, A.
    Senthilvelan, T.
    ENGINEERING FAILURE ANALYSIS, 2013, 30 : 17 - 26
  • [30] Surface Roughness Optimization in a Drilling Operation Using the Taguchi Design Method
    Zhang, Julie Z.
    Chen, Joseph C.
    MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (04) : 459 - 467