Controlled reactive modification of polypropylene with maleic anhydride via solvent-free technique

被引:7
|
作者
Kucera, Frantisek [1 ,2 ]
Petrus, Josef [2 ]
Polacek, Petr [2 ]
Jancar, Josef [1 ,2 ]
机构
[1] Brno Univ Technol, Inst Mat Chem, Fac Chem, Purkynova 118, Brno 61200, Czech Republic
[2] Brno Univ Technol, Cent European Inst Technol, Purkynova 123, Brno 61200, Czech Republic
关键词
Polypropylene; Stabilization; Radical grafting; Reactive modification; Maleic anhydride; GLYCIDYL METHACRYLATE; ITACONIC ACID; EXTRUSION; DEGRADATION; FUNCTIONALIZATION; POLYETHYLENE; SOLUBILITY; ADDITIVES; LDPE;
D O I
10.1016/j.polymdegradstab.2019.108934
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The effect of radical scavengers on the control of beta-scission of polypropylene (PP) during the free-radical grafting with maleic anhydride (MAH) in melt was investigated. The main interest was the evaluation of the effective concentration of radical scavengers Irganox 1010 (IRN1010) and Irgafos 168 (IRF168) for better control of grafting process. For this purpose, radical grafting of non-stabilized PP was performed in order to describe specifically the effect of proposed additives with no effect of additives in commercial PP grades. For this purpose, the influence of the initial concentration of IRN1010 ([1RN1010](0)) on the reaction course was predicted with respect to the change of kinetic parameters, thermal and rheological properties of PP-g-MAH. Obtained results showed that the efficiency of IRN1010 and IRF168 is not proportional to their concentration above critical level as evidenced by rheological properties of PP-g-MAH. Above that point, both the grafting efficiency and grafting rate decrease and thus the determination of effective CIRN1010 is the key for approaching controlled radical grafting of PP. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页数:8
相关论文
共 50 条
  • [31] Styrene-assisted grafting of maleic anhydride onto polypropylene by reactive processing
    Bettini, S.H.P.
    Ruvolo Filho, A.C.
    Journal of Applied Polymer Science, 1600, 107 (03): : 1430 - 1438
  • [32] Impact modification of polypropylene by ethylene propylene copolymer-grafted maleic anhydride
    Mehrabzadeh, M
    Nia, KH
    JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 72 (10) : 1257 - 1265
  • [33] Styrene-assisted grafting of maleic anhydride onto polypropylene by reactive processing
    Bettini, S. H. P.
    Ruvolo Filho, A. C.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 107 (03) : 1430 - 1438
  • [34] Functionalization of isotactic polypropylene with maleic anhydride by reactive extrusion: mechanism of melt grafting
    Shi, D
    Yang, JH
    Yao, ZH
    Wang, Y
    Huang, HL
    Jing, W
    Yin, JH
    Costa, G
    POLYMER, 2001, 42 (13) : 5549 - 5557
  • [35] Modification of wood flour/PLA composites by reactive extrusion with maleic anhydride
    Lv, Shanshan
    Gu, Jiyou
    Tan, Haiyan
    Zhang, Yanhua
    JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (15)
  • [36] Solvent-free maleic anhydride grafted cellulose acetate butyrate (MA-G-CAB): Synthesis and characterizations.
    Wibowo, A
    Mohanty, AK
    Desai, S
    Misra, M
    Drzal, LT
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2004, 227 : U379 - U380
  • [37] Effect of Surface Modification of Palygorskite on the Properties of Polypropylene/Polypropylene-g-Maleic Anhydride/Palygorskite Nanocomposites
    Cisneros-Rosado, David
    Alonso Uribe-Calderon, Jorge
    INTERNATIONAL JOURNAL OF POLYMER SCIENCE, 2017, 2017
  • [38] Free radical mechanism for reactive processing of polymers in the presence of organoclay/peroxide nanoreactors: Grafting maleic anhydride onto polypropylene
    Riveros Munoz, Pablo Andres
    Canevarolo, Sebastiao Vicente
    Prado Bettini, Silvia Helena
    CHEMICAL ENGINEERING SCIENCE, 2021, 230
  • [39] Solvent-free mechanochemical modification of lappaconitine and piroxicam
    Pankrushina, N.
    Nikitina, I.
    Chernjak, E.
    Myz, C.
    Shakhtshneider, T.
    Boldyrev, V.
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (06) : 561 - 565
  • [40] MORPHOLOGY OF MALEIC-ANHYDRIDE GRAFTED POLYPROPYLENE AND POLYAMIDE ALLOY PRODUCED BY REACTIVE PROCESSING
    NISHIO, T
    SUZUKI, Y
    KOJIMA, K
    KAKUGO, M
    JOURNAL OF POLYMER ENGINEERING, 1991, 10 (1-3) : 123 - 149