A PARAMETRIC STUDY ON THE INFLUENCE OF IMPERFECTIONS ON PIPE MECHANICAL RESPONSE DURING BENDING IN REEL-LAY INSTALLATION USING FINITE ELEMENT METHOD

被引：0
|
作者：
Dawood, Ali A. [1 ]
Kenny, S. [1 ]
机构：
[1] Mem Univ Newfoundland, St John, NF, Canada
来源：
33RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2014, VOL 6B: PIPELINE AND RISER TECHNOLOGY | 2014年
关键词：
D O I：
暂无
中图分类号：
P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
Finite element modelling procedures were developed to examine the effect of pipe diameter, ovality, wall thickness, imperfection formulations, joint-to-joint material strength variation and radial weld offset on the pipe mechanical response through numerical simulation of the reeling process. This study examines the pipe deformation, stress concentration, and strain discontinuity developed during simulation of the pipe reeling process. The key parameters influencing the pipe mechanical response are identified and recommendations on future work provided.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] FINITE ELEMENT METHOD SIMULATING THE PIPELINE MECHANICAL RESPONSE DURING REEL-LAY INSTALLATION
    Dawood, Ali A.
    Kenny, S.
    PROCEEDINGS OF THE ASME 32ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING - 2013, VOL 4A, 2013,
  • [2] Finite Element Analysis of Subsea Pipe-in-Pipe Installation with Reel-Lay
    Li, Ying
    Liu, Zhilong
    Ding, Penglong
    Yang, Shugeng
    Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 2015, 48 (05): : 438 - 444
  • [3] FINITE ELEMENT ANALYSIS OF CLAMP-ON BUCKLE ARRESTOR FOR PIPE-IN-PIPE FLOWLINES BY REEL-LAY INSTALLATION
    Sun, Jason
    Jukes, Paul
    PROCEEDINGS OF THE 27TH INTERNATIONAL CONFERENCE ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING - 2008, VOL 3, 2008, : 197 - 203
  • [4] Lined Pipe Testing and Finite Element Modelling for Reel-lay Application
    Le, Minh
    Ahmed-Kogri, Mamadou
    Stableford, Richard
    Giry, Eric
    INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, 2022, 32 (04) : 463 - 472
  • [5] Evolution of pipe properties during reel-lay process: Experimental characterisation and finite element modelling
    Martinez, Michael
    Brown, George
    PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING, VOL 3, 2005, : 419 - 429
  • [6] New tool for internal pressure during fabrication and installation of mechanically lined pipelines using reel-lay method
    Zhao Tianfeng
    Tian Zhigang
    APPLIED OCEAN RESEARCH, 2016, 58 : 232 - 240
  • [7] Mechanical Response of Femur Bone to Bending Load Using Finite Element Method
    Bhardwaj, Akshay
    Gupta, Arpan
    Tse, Kwong Ming
    2014 RECENT ADVANCES IN ENGINEERING AND COMPUTATIONAL SCIENCES (RAECS), 2014,
  • [8] Assessment of the OTEC cold water pipe design under bending loading: A benchmarking and parametric study using finite element approach
    Adie, Prayoga Wira
    Adiputra, Ristiyanto
    Prabowo, Aditya Rio
    Erwandi, Erwandi
    Muttaqie, Teguh
    Muhayat, Nurul
    Huda, Nurul
    JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS, 2023, 32 (01)
  • [9] Study of the influence of pavement unevenness on the mechanical response of asphalt pavement by means of the finite element method
    Liu, Pengfei
    Ravee, Visaagan
    Wang, Dawei
    Oeser, Markus
    JOURNAL OF TRAFFIC AND TRANSPORTATION ENGINEERING-ENGLISH EDITION, 2018, 5 (03) : 169 - 180
  • [10] Study of the influence of pavement unevenness on the mechanical response of asphalt pavement by means of the finite element method
    Pengfei Liu
    Visaagan Ravee
    Dawei Wang
    Markus Oeser
    Journal of Traffic and Transportation Engineering(English Edition) , 2018, (03) : 169 - 180
12345