FINITE ELEMENT METHOD SIMULATING THE PIPELINE MECHANICAL RESPONSE DURING REEL-LAY INSTALLATION

被引：0
|
作者：
Dawood, Ali A. [1 ]
Kenny, S. [1 ]
机构：
[1] Mem Univ Newfoundland, St John, NF, Canada
来源：
PROCEEDINGS OF THE ASME 32ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING - 2013, VOL 4A | 2013年
关键词：
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Finite element modelling procedures to simulate the pipeline mechanical response during reel lay installation are calibrated from the available literature. A three-dimensional continuum model was developed to simulate the bending and straightening processes during reel lay installation and was compared with physical tests conducted within a bending rig and four-point bending test frame. A range of pipeline diameters, wall thicknesses, material grades and weld offsets are examined.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] A PARAMETRIC STUDY ON THE INFLUENCE OF IMPERFECTIONS ON PIPE MECHANICAL RESPONSE DURING BENDING IN REEL-LAY INSTALLATION USING FINITE ELEMENT METHOD
    Dawood, Ali A.
    Kenny, S.
    33RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2014, VOL 6B: PIPELINE AND RISER TECHNOLOGY, 2014,
  • [2] Finite Element Analysis of Subsea Pipe-in-Pipe Installation with Reel-Lay
    Li, Ying
    Liu, Zhilong
    Ding, Penglong
    Yang, Shugeng
    Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 2015, 48 (05): : 438 - 444
  • [3] SANDWICH PIPE: REEL-LAY INSTALLATION EFFECTS
    Paz, Claudio Moura
    Fu, Guangming
    Estefen, Segen Farid
    Lourenco, Marcelo Igor
    Chujutalli, John Alex H.
    PROCEEDINGS OF THE ASME 34TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2015, VOL 5B, 2015,
  • [4] PIPELINE ROLL DURING REEL-LAY INSTALLATION DUE TO PIGGYBACK DEH CABLE AND LOCAL RESIDUAL CURVATURE
    Endal, Geir
    Rao, Venu
    Ragupathy, P.
    Sriskandarajah, T.
    33RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2014, VOL 6B: PIPELINE AND RISER TECHNOLOGY, 2014,
  • [5] HIGH PEAK STRAIN ON PIPELINE MATERIAL DURING REEL-LAY: ACCEPTABLE OR NOT?
    Karjadi, Erwan
    Smienk, Henk
    Thibaux, Philippe
    Aamlid, Olav
    PROCEEDINGS OF THE ASME 35TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING , 2016, VOL 5, 2016,
  • [6] Lined Pipe Testing and Finite Element Modelling for Reel-lay Application
    Le, Minh
    Ahmed-Kogri, Mamadou
    Stableford, Richard
    Giry, Eric
    INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, 2022, 32 (04) : 463 - 472
  • [7] Evolution of pipe properties during reel-lay process: Experimental characterisation and finite element modelling
    Martinez, Michael
    Brown, George
    PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING, VOL 3, 2005, : 419 - 429
  • [8] FINITE ELEMENT ANALYSIS OF CLAMP-ON BUCKLE ARRESTOR FOR PIPE-IN-PIPE FLOWLINES BY REEL-LAY INSTALLATION
    Sun, Jason
    Jukes, Paul
    PROCEEDINGS OF THE 27TH INTERNATIONAL CONFERENCE ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING - 2008, VOL 3, 2008, : 197 - 203
  • [9] Analysis on the mechanical behavior of sandwich pipes in the reeling and straightening stage of reel-lay installation
    Liu S.
    Huang Y.
    Meng W.
    Jiang D.
    Liu H.
    Li M.
    Gao Y.
    Fu G.
    Natural Gas Industry, 2020, 40 (12): : 143 - 150
  • [10] REEL-LAY METHOD TO CONTROL GLOBAL PIPELINE BUCKLING UNDER OPERATING LOADS
    Endal, Geir
    Giske, Stein R.
    Moen, Kjetil
    Sande, Stian
    33RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2014, VOL 6B: PIPELINE AND RISER TECHNOLOGY, 2014,
12345