Selective laser melting of AlSi10 Mg: Influence of process parameters on Mg2Si precipitation and Si spheroidization

被引：70
|
作者：
Biffi, C. A. [1 ]
Fiocchi, J. [1 ]
Tuissi, A. [1 ]
机构：
[1] CNR, Inst Condensed Matter Chem & Technol Energy, Unit Lecco, CNR ICMATE, Via Previati 1E, I-23900 Lecce, Italy
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2018年 / 755卷
关键词：
Selective laser melting; Additive manufacturing; AlSi10; Mg; Thermal analysis; Microstructure; ALUMINUM-ALLOY; MECHANICAL-PROPERTIES; MELTED ALSI10MG; MICROSTRUCTURE; POWDER; ROUGHNESS; PRODUCTS; PROPERTY; STRENGTH; BEHAVIOR;
D O I：
10.1016/j.jallcom.2018.04.298
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In Selective Laser Melting (SLM) both structural and functional properties of built parts are drastically affected by the process parameters, such as laser beam power, exposure time and building platform temperature. The effect of the mentioned parameters on the microstructure evolution and mechanical properties of AlSi10 Mg SLM builts were investigated. It was found that chemical composition, melting point and phases morphology were not varied. On the contrary, thermal analysis indicated that Mg2Si precipitation as well as Si spheroidization phenomena were slightly affected by laser energy density. This effect becomes relevant for choosing the right thermal treatments required for mechanical property optimization of SLM built Al alloy components. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：100 / 107
页数：8
相关论文
共 50 条
  • [1] Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
    Delahaye, J.
    Tchuindjang, J. Tchoufang
    Lecomte-Beckers, J.
    Rigo, O.
    Habraken, A. M.
    Mertens, A.
    ACTA MATERIALIA, 2019, 175 : 160 - 170
  • [2] Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg
    Hadadzadeh, Amir
    Amirkhiz, Babak Shalchi
    Mohammadi, Mohsen
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 739 : 295 - 300
  • [3] Influence of laser beam profile on the selective laser melting process of AlSi10Mg
    Wischeropp, Tim Marten
    Tarhini, Hussein
    Emmelmann, Claus
    JOURNAL OF LASER APPLICATIONS, 2020, 32 (02)
  • [4] Spheroidization of Mg2Si particles in Mg-4Al-2Si alloys during solution treatment process
    Song, Pei-Wei
    Guo, Xue-Feng
    Jing, Xiao-Tian
    Zhang, Zhong-Ming
    Xu, Chun-Jie
    Cailiao Gongcheng/Journal of Materials Engineering, 2007, (03): : 34 - 37
  • [5] EFFECT OF BUILD ATMOSPHERE ON THE SURFACE ROUGHNESS OF AlSi10 Mg SAMPLES PRODUCED BY SELECTIVE LASER MELTING
    Hein T.Z.
    Babaytsev A.V.
    Ripetskiy A.V.
    Nanoscience and Technology, 2022, 13 (01): : 1 - 9
  • [6] Effect of process parameters on residual stress in selective laser melting of AlSi10Mg
    Jiang, Xiaohui
    Ye, Tong
    Zhu, Yihong
    MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (03) : 342 - 352
  • [7] The Influence of Selective Laser Melting Parameters on Density and Mechanical Properties of AlSi10Mg
    Raus, A. A.
    Wahab, M. S.
    Shayfull, Z.
    Kamarudin, K.
    Ibrahim, M.
    2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016), 2016, 78
  • [8] The Influence of the Mg2Si Content on Corrosion Resistance of Mg/Mg2Si Metal Matrix Composites
    Majchrzak, Kinga
    Malik, Marcin A.
    OCHRONA PRZED KOROZJA, 2010, 53 (11): : 655 - 655
  • [9] The influence of process parameters on vertical surface roughness of the AlSi10Mg parts fabricated by selective laser melting
    Yang, Tao
    Liu, Tingting
    Liao, Wenhe
    MacDonald, Eric
    Wei, Huiliang
    Chen, Xiangyuan
    Jiang, Liyi
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 266 : 26 - 36
  • [10] Morphology and crystallography of β-Mg2Si precipitation in Al-Mg-Si alloys
    Ohmori, Y
    Doan, LC
    Matsuura, Y
    Kobayashi, S
    Nakai, K
    MATERIALS TRANSACTIONS, 2001, 42 (12) : 2576 - 2583
12345