Characterization of Al-Mg Alloy Aged at Low Temperatures

被引：34

作者：

Yi, Gaosong ^{[1
]}

Cullen, David A. ^{[2
]}

Littrell, Kenneth C. ^{[3
]}

Golumbfskie, William ^{[4
]}

Sundberg, Erik ^{[1
]}

Free, Michael L. ^{[1
]}

机构：

[1] Univ Utah, Dept Met Engn, 135 S 1460 E,Rm412, Salt Lake City, UT 84112 USA

[2] Oak Ridge Natl Lab, Mat Sci & Technol Div, Oak Ridge, TN 37831 USA

[3] Oak Ridge Natl Lab, Chem & Engn Mat Div, Oak Ridge, TN 37831 USA

[4] Naval Sea Syst Command Carderock Div, West Bethesda, MD 20817 USA

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2017年 / 48A卷 / 04期

关键词：

STRESS-CORROSION CRACKING; ANGLE NEUTRON-SCATTERING; GUINIER-PRESTON ZONES; MICROSTRUCTURAL EVOLUTION; ELECTRON-MICROSCOPY; GRAIN-BOUNDARY; GP ZONES; PRECIPITATION; PHASE; DECOMPOSITION;

D O I：

10.1007/s11661-017-3992-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Long-term aged [343 K (70 A degrees C) for 30 months and natural exposure for over 10 years] Al 5456 H116 samples were characterized using electron backscatter diffraction (EBSD), scanning transmission electron microscopy (STEM), state-of-the-art energy-dispersive X-ray spectroscopy (EDS) systems, and small-angle neutron scattering (SANS). ASTM G-67 mass loss tests of the sensitized Al 5456 alloy samples were conducted. Intragranular Mg-rich precipitates, such as Guinier-Preston (GP) zones, were confirmed in Al 5456 H116 aged at 343 K (70 A degrees C) for 30 months, and the volume of these precipitates is 1.39 pct. beta' phase is identified at the grain boundary of a navy ship sample, while high-resolution STEM results reveal no intragranular precipitates. Intergranular corrosion (IGC) of Al 5456 was found to be related to the continuity of intergranular precipitates.

引用

页码：2040 / 2050

页数：11

共 50 条

[21] PRECIPITATION AND GENERATION OF DISLOCATIONS IN AN AL-MG ALLOY
MATSUURA, K
KODA, S
JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, 1965, 20 (02) : 251 - &
[22] Formability of Al-Mg alloy at warm temperature
Takata, K
Ohwue, T
Saga, M
Kikuchi, M
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 631 - 636
[23] THE MECHANISM OF SUPERPLASTIC FLOW IN AN AL-MG ALLOY
DYBIEC, H
KORBEL, A
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1989, 117 : L31 - L34
[24] Al-Mg Alloy powders for hydrogen storage
Kan Hongmin
Zhang Ning
Wang Xiaoyang
ADVANCES IN CHEMICAL ENGINEERING II, PTS 1-4, 2012, 550-553 : 497 - 501
[25] DEFORMATION-BEHAVIOR OF AL-MG ALLOY
MUKHOPADHYAY, J
RAO, AM
MALLIK, AK
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1985, 38 (05): : 389 - 394
[26] Foaming characteristics of Al-Mg alloy foam
Kim, Sang Youl
Um, Yong Su
Hur, Bo Young
ECO-MATERIALS PROCESSING & DESIGN VII, 2006, 510-511 : 902 - 905
[27] Mixing properties of Al-Mg liquid alloy
Adhikari, D.
Jha, I. S.
Singh, B. P.
INDIAN JOURNAL OF PHYSICS, 2012, 86 (09) : 783 - 786
[28] CHLORIDES IN THE COMMERCIAL AL-MG ALLOY SHEETS
TSUCHIDA, S
KATAOKA, Y
SUMITOMO LIGHT METAL TECHNICAL REPORTS, 1979, 20 (3-4): : 41 - 49
[29] Role of Mg in the stress corrosion cracking of an Al-Mg alloy
Jones, RH
Baer, DR
Danielson, MJ
Vetrano, JS
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (07): : 1699 - 1711
[30] Role of Mg in the stress corrosion cracking of an Al-Mg alloy
R. H. Jones
D. R. Baer
M. J. Danielson
J. S. Vetrano
Metallurgical and Materials Transactions A, 2001, 32 : 1699 - 1711

← 1 2 3 4 5 →