Design of Cu- and Ag-containing amorphous carbon multilayers with improved tribo-mechanical properties

被引：7

作者：

Tillmann, Wolfgang ^{[1
]}

Dias, Nelson Filipe Lopes ^{[1
]}

Stangier, Dominic ^{[1
]}

Matveev, Serguei ^{[2
]}

Thomann, Carl Arne ^{[3
]}

Debus, Joerg ^{[3
]}

机构：

[1] TU Dortmund Univ, Inst Mat Engn, Leonhard Euler Str 2, D-44227 Dortmund, Germany

[2] JEOL Germany GmbH, Gute Anger 30, D-85356 Freising Weihenstephan, Germany

[3] TU Dortmund Univ, Expt Phys 2, Otto Hahn Str 4a, D-44227 Dortmund, Germany

来源：

MATERIALS LETTERS | 2021年 / 284卷

关键词：

Amorphous carbon; Silver; Copper; Sputtering; Multilayer structure; Tribology;

D O I：

10.1016/j.matlet.2020.128905

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The modification of amorphous carbon (a-C) films by adding either Cu or Ag is a common approach to tailor the film properties. These films become less hard, while they demonstrate higher friction and lower wear resistance than a-C. To enhance tribologically relevant features, multilayers of alternating a-C and a-C:Cu or a-C:Ag layers are synthetized by magnetron sputtering. The a-C/a-C:Cu and a-C/a-C:Ag multilayers possess a bilayer period of-200 nm, a layer ratio of 1, and a bilayer number of 5. These structures are characterized by higher hardness and lower friction and wear against 100Cr6 counterparts as compared to monolayered a-C:Cu and a-C:Ag. (C) 2020 Elsevier B.V. All rights reserved.

引用

页数：4

共 50 条

[21] Microstructure and mechanical properties of Ag-containing diamond-like carbon films in mid-frequency dual-magnetron sputtering
Wang, Chengbiao
Yu, Xiang
Hua, Meng
APPLIED SURFACE SCIENCE, 2009, 256 (05) : 1431 - 1435
[22] Carbon nanotube functionalization as a route to enhancing the electrical and mechanical properties of Cu- CNT composites
Milowska, Karolina Z.
Burda, Marek
Wolanicka, Lidia
Bristowe, Paul D.
Koziol, Krzysztof K. K.
NANOSCALE, 2019, 11 (01) : 145 - 157
[23] Investigating the influence of B, C, and N on the tribo-mechanical properties of the chemically complex TiSiBCN thin films using design of experiments
Tillmann, Wolfgang
Urbanczyk, Julia
Ebady, Ahmad Zahid
Thewes, Alexander
Braeuer, Guenter
Dias, Nelson Filipe Lopes
SURFACE & COATINGS TECHNOLOGY, 2025, 496
[24] Correlation Between Structure and Mechanical Properties of Amorphous Cu-Ag Alloys
Belouarda, Kaoutar
Kbirou, Meryem
Saadouni, Khalid
Badawi, Michael
Mazroui, M'hammed
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2021, 258 (03):
[25] The Role of Intermetallic Compounds in Controlling the Microstructural, Physical and Mechanical Properties of Cu-[Sn-Ag-Cu-Bi]-Cu Solder Joints
Reza Sayyadi
Homam Naffakh-Moosavy
Scientific Reports, 9
[26] Preparation and Properties of Ag-Containing Diamond-Like Carbon Films by Magnetron Plasma Source Ion Implantation
Baba, K.
Hatada, R.
Flege, S.
Ensinger, W.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2012, 2012
[27] The Role of Intermetallic Compounds in Controlling the Microstructural, Physical and Mechanical Properties of Cu-[Sn-Ag-Cu-Bi]-Cu Solder Joints
Sayyadi, Reza
Naffakh-Moosavy, Homam
SCIENTIFIC REPORTS, 2019, 9 (1)
[28] Improved tribo-mechanical behavior of CaP-containing TiO2 layers produced on titanium by shot blasting and micro-arc oxidation
Eduardo M. Szesz
Gelson B. de Souza
Gabriel G. de Lima
Bruno A. da Silva
Neide K. Kuromoto
Carlos M. Lepienski
Journal of Materials Science: Materials in Medicine, 2014, 25 : 2265 - 2275
[29] Microstructure and Mechanical Properties of Cu-Containing Amorphous Carbon Nanocomposite Thin Films by a Hybrid Deposition Technique
Luo, Jingying
Sun, Deen
Zhang, Sam
Qian, Haixia
Huang, Jiamu
NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 2017, 9 (04) : 438 - 445
[30] Improved tribo-mechanical behavior of CaP-containing TiO2 layers produced on titanium by shot blasting and micro-arc oxidation
Szesz, Eduardo M.
de Souza, Gelson B.
de Lima, Gabriel G.
da Silva, Bruno A.
Kuromoto, Neide K.
Lepienski, Carlos M.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2014, 25 (10) : 2265 - 2275

← 1 2 3 4 5 →